Table of Contents
Advertisement
STARTING AND USE
INTRODUCTION
The automatic chain tensioning (PELLENC innovation)
facilitates tool maintenance!
The automatic chain tensioning system (PELLENC
innovation) facilitates the installation of the chain and its
tension adjustment. Position the guide, and clip it, the guide
is in position! You can permanently lock it in position using
the retractable wrench (PELLENC innovation).
The automatic chain tensioning along with the PELLENC
retractable wrench can also be used to retighten the guide in
a few seconds: no need for additional wrenches!
Make sure that the chain tension is correct by pulling the chain.
1 to 3 drive links should appear.
CHAIN BRAKE
Your chain saw is fitted with an impact detection system
In the event of impact (bounce) your chain saw will stop
immediately.
Ensure the chain is not in contact with anything before
you start up the chain saw again.
CHECKING THE CHAIN BRAKE
Realize dry movements from top to bottom to activate the
safety device.
WARNING: never operate the chain saw if the safety
device is not operating.
15
51_08_025A
51_08_026A
51_08_027A
Advertisement
Table of Contents
