Adjusting The Depth Limiters - pellenc Selion C21 HD User Manual

„ Check the depth limiters again. If the depth limiters need
adjusting again, follow the instructions on page 29.
Note: Do not file the top of the drive links or the side links
fitted with an anti-kickback guard.

ADJUSTING THE DEPTH LIMITERS

Sharpening kit P/No. 68520
0,65 mm
„ Use a depth gage corresponding to the type of chain to be
sharpened.
„ Check the depth limiters every 2 or 3 sharpening
operations.
„ Place the depth gage on the cutter.
„ If the depth limiter goes beyond, file it to the level of the
depth gage using a flat file.
„ Always file from the interior of the chain towards the cutter,
placed at the exterior.
Note: Do not file or damage the top of the drive links or the
side links fitted with an anti-kickback guard.
„ File from the interior of the cutter towards the exterior.
exterior
interior
22