Table of Contents
Advertisement
11. Using the Wi-Fi function
•
Check the wireless access points instruction manual and settings when saving a wireless
access point.
•
If no connection can be established, the wireless access point's radio waves may be too weak.
"
Refer to
Message Display
•
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Connecting from a location away from your house (direct connection)
You can select the method for connecting to the device you
are using.
Select the connection method supported by your device.
[Wi-Fi Direct]
[WPS Connection]
[Manual Connection]
"
"
(P322)
and
Troubleshooting
1
Set the device to Wi-Fi Direct mode.
2
Select [Wi-Fi Direct].
3
Select the device to connect to.
•
Read the operating instructions of your device for details.
[WPS (Push-Button)]
1
Select [WPS (Push-Button)].
2
Set the device to WPS mode.
•
You can wait longer for a connection by pressing [DISP.] on this
unit.
[WPS (PIN code)]
1
Select [WPS (PIN code)].
2
Enter the PIN code of the device into this unit.
Enter the SSID and password into
the device. The SSID and
password are displayed on the
connection waiting screen of this
unit.
•
If the destination is set to
[Smartphone], the password is not
displayed. Select the SSID to establish a connection.
290
"
(P335)
for details.
(P254)
Advertisement
Table of Contents
