Table of Contents
Advertisement
11. Using the Wi-Fi function
About the Wi-Fi connection lamp
∫
Lit blue:
The Wi-Fi connection is on standby
Blinking blue:
Sending/receiving data through the Wi-Fi connection
About the [Wi-Fi] button
∫
[Wi-Fi]/[Fn1] button can be used in two ways, as [Wi-Fi] or as
[Fn1] (function 1).
At the time of purchase, it is initially set to [Wi-Fi].
•
Refer to
P59
for details about the function button.
•
When you activate Self Shot Mode by rotating the LCD monitor,
the [Wi-Fi]/[Fn1] button works as a shutter button.
Pressing [Wi-Fi] before connecting to Wi-Fi
(When connecting to a smartphone)
•
The information required for connecting the smartphone to this
unit is displayed.
(P254)
•
You can select the following items by pressing [DISP.].
(You can also display the same menu by performing the following
operations:
>
[Setup] > [Wi-Fi] > [Wi-Fi Function]. )
MENU
[New Connection]
[Select a destination from History]
[Select a destination from Favorite]
•
These operating instructions describe the procedure for [New Connection].
What you can do with the [Wi-Fi] button when connected to Wi-Fi
•
Following items can be selected.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
¢2
Images]
[Register the Current Destination
to Favorite]
¢1
[Network Address]
¢1 These items are not displayed when you press 4 to send the displayed image to a web
service
(P279)
or when you change the settings for sending images or terminate the
connection.
¢2 This is not displayed when the destination of [Remote Shooting & View], [Playback on TV] or
[Send Images Stored in the Camera] is set to [Printer].
(P291)
(P291)
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to select
¢1
a different Wi-Fi connection.
Refer to
P295
Registering the current connection destination or the
connection method, you can easily connect with the same
connection method next time.
Displays the MAC address and IP address of this unit.
250
for details.
Advertisement
Table of Contents
