Panasonic Lumix DMC-GF7 Operating Instructions For Advanced Features page 64

2. Getting Started/Basic Operations
[Monitor Luminance]
•
The brightness of pictures displayed on the monitor is enhanced, so some subjects on the
monitor may appear different from the actual subjects. However, this enhancement does not
affect recorded pictures.
•
The monitor automatically returns to standard brightness if no operations are performed for
30 seconds when recording in [MODE1]. It will light up brightly again with button or touch
operation.
•
When [AUTO] or [MODE1] is set, the usage time is reduced.
•
[AUTO] is only available in the Recording Mode.
•
The initial setting when using the AC adaptor (optional) is [MODE2].
[Economy]
•
Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode].
•
To turn the monitor on again, press any button or touch the monitor.
•
[Economy] does not work in the following cases.
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
When using [Multi Exp.]
–
When using [Time Lapse Shot]
–
When [Auto Shooting] in [Stop Motion Animation] is set to [ON].
•
When using the AC adaptor (optional), [Sleep Mode] is disabled.
•
When using the AC adaptor (optional), [Auto Monitor Off] is fixed to [5MIN.].
Sets the monitor brightness according to the ambient light level.
„ [AUTO]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [MODE1]:
1
Make the monitor brighter.
... [MODE2]:
2
Set the monitor to the standard brightness.
... [MODE3]:
3
Make the monitor darker.
The unit can be set up to prevent unnecessary battery
consumption.
[Sleep Mode]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF]
[Auto Monitor Off]:
The monitor is automatically turned off if the camera has not been
used for the time selected on the setting.
[5MIN.]/[2MIN.]/[1MIN.]
64