Panasonic Lumix DMC-GF7 Operating Instructions For Advanced Features page 142

5. Focus and Brightness (Exposure) Settings
When selecting [š], [Ø]
Position and size of the AF area can be changed.
1
Press 2 ( ).
2
Select [š] or [Ø] and press 4.
•
AF area setting screen is displayed.
•
You can also display the AF area setting screen by
touching the screen.
3
Change the position and size of the AF area.
Button
operation
3/4/2/1
s
[DISP.]
•
If you set the AF area over an eye in the yellow frame when [š] is selected, the eye to be
in focus will be changed.
4
Press [MENU/SET] to set.
•
AF area with the same function as [Ø] is displayed in the touched position, when the [š]
is selected.
Setting of the AF area is cleared when [MENU/SET] is pressed or [
When selecting [
The 23 AF areas can be divided into 9 areas and the area to be focused can be set.
1
Press 2 ( ).
2
Select [ ] and press 4.
•
AF area setting screen is displayed.
3
Press 3/4/2/1 to select the AF area frame as
shown in the figure on the right.
•
AF area frame can also be selected by touching the
screen.
4
Press [MENU/SET] to set.
•
Only [i] display (centre point of selected AF area frame) will remain on the screen.
•
Setting of the AF area frame is cleared when [MENU/SET] is pressed or [
Touch
operation
Touching Moves the AF area.
Pinching out/in Enlarges/reduces the AF area in small steps.
Enlarges/reduces the AF area in large steps.
s
Resets the AF area back to the centre.
•
If you press the button again, the frame size will
[Reset]
be reset to the default setting.
(P139)
]
Description of operation
142
] is touched.
] is touched.