Table of Contents
Advertisement
7. Functions Customised for Various Subjects and Purposes
Using screens and displays suitable for
recording
Checking areas that may be white saturated ([Zebra Pattern])
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level
(brightness) to be processed as a zebra pattern.
>
[Custom] > [Zebra Pattern]
MENU
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA1]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[ZEBRA2]
[OFF]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
•
[SET]
•
If there are any white saturated areas, we recommend compensating the exposure towards
negative
(P156)
referring to the histogram
•
Displayed zebra patterns will not be recorded.
•
If you assign [Zebra Pattern] to [Fn Button Set]
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1] > [Zebra 2] > [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] → [OFF], allowing
you to switch the setting quickly.
You can select a brightness value between [50%] and [105%]. In [Zebra 2],
you can select [OFF]. If you select [100%] or [105%], only the areas that
are already white saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be processed as a zebra
pattern will be.
—
(P44)
and then taking the picture.
(P59)
in the [Custom] menu, each time you
188
Advertisement
Table of Contents
