Table of Contents
Advertisement
2. Getting Started/Basic Operations
About the tilt sensor display
∫
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1
Press [DISP.] to display the tilt sensor.
2
Check the tilt of the camera.
A Horizontal direction:
Correcting tilt to the left
B Vertical direction:
Correcting downward tilt
•
When the tilt of the camera is little, the indicator changes to green.
•
When recording with a vertical orientation, the display automatically switches to a
vertically orientated display.
•
Even after correcting the tilt, there may still be an error of approximately n1°.
•
When a function button is set to [Level Gauge], the tilt sensor display can be switched on/off by
pressing the function button.
Not available in these cases:
•
Tilt sensor display may not be displayed correctly when this unit is in motion.
•
When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function
(P35)
may not work correctly.
45
Advertisement
Table of Contents
