13. Others
Flash
The flash is not activated.
•
Is the flash closed?
> Open the flash.
•
When the electronic shutter is used, the flash is not activated.
> Set [Shutter Type] to [AUTO] or [EFC].
•
When [Silent Mode] is set to [ON], the flash is not activated.
> Set [Silent Mode] to [OFF].
The flash is activated 2 times.
•
The flash is activated 2 times.
The interval between the first and second flash is longer when Red-Eye Reduction
set so the subject should not move until the second flash is activated.
Monitor
The Monitor turns off although the camera is turned on.
•
If no operations are performed during the set time period, [Auto Monitor Off]
and the Monitor turns off.
The Monitor is too bright or dark.
•
Check [Monitor Luminance] setting.
•
Perform [Monitor Display].
It may flicker for an instant or the brightness of the screen may change
significantly for an instant.
•
This occurs due to the aperture of the lens changing when the shutter button is pressed
halfway, or when the brightness of the subject changes. This is not a malfunction.
(P198)
(P64)
(P63)
(P161)
(P181)
340
(P201)
is
(P64)
is activated,