6. Shutter and Drive Settings
•
The burst speed may become slower depending on the following settings.
–
[Picture Size] (P127)/[Quality] (P128)/[Sensitivity] (P157)/Focus Mode (P135)/[Focus/
Release Priority]
•
Burst speed can also be set with [Burst Rate] in the [Rec] menu.
•
Refer to
P128
4
Focus on the subject and take a picture.
•
Hold down the shutter button fully to activate the Burst
Mode.
∫
Cancelling the Burst Mode
Select [
] ([Single]) or [
Focusing in Burst Mode
The focus changes depending on the setting for [Focus/Release Priority]
[Custom] menu and the setting for [Focus Mode]
Focus mode
[AFS]
[AFF]/[AFC]
¢1
[MF]
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
(P147)
for information about RAW files.
] from among the drive modes.
[Focus/Release
Priority]
[FOCUS]
[RELEASE]
[FOCUS]
[RELEASE]
—
(P135)
in the [Rec] menu.
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
165
4:3
AFS
AFS
50 i
L
H
(P163)
(P147)
in the
Focus
¢2
¢3