4. Picture Quality and Colour Tone Settings
•
[Toy Effect]/[Toy Pop]/[Miniature Effect]/[Sunshine] are not available in Panorama Shot Mode.
•
The image effects of [Rough Monochrome]/[Silky Monochrome]/[Soft Focus]/[Star Filter] are not
visible on the screen when taking panorama pictures.
•
Using [High Key] in Panorama Shot Mode may not be effective in dimly-lit conditions.
•
Using [Impressive Art] in Panorama Shot Mode may cause seams between pictures to become
noticeable.
•
The available ISO sensitivity settings will be limited up to [ISO3200]. The ISO sensitivity for
[High Dynamic] will be fixed to [AUTO].
•
When using [Filter Select], you cannot use menus or recording functions not available in
Creative Control Mode.
For example, White Balance will be fixed to [AWB] and the flash will be set to [ Œ ] (forced flash
off).
•
The settings will be stored even if you change recording mode or turn off the camera.
•
Those menu items are shared by the [Rec] menu and the [Motion Picture] menu. When the
setting for either of the two is changed, the setting for the other is also changed.
Taking a picture with and without an image effect simultaneously
([Simultaneous record w/o filter])
You can press the shutter button once and take two pictures simultaneously, one with an
image effect and the other one without it.
>
[Rec] > [Filter Settings] > [Simultaneous record w/o filter]
MENU
Settings: [ON]/[OFF]
•
When this item is set to [ON], a picture with an image effect will be taken first, followed by a
picture without it.
•
Only an image with an image effect is displayed for Auto Review.
•
If the drive mode is set to [Burst] or [Auto Bracket], it is switched to [Single].
Not available in these cases:
•
In the following case, [Simultaneous record w/o filter] does not work:
–
Panorama Shot Mode
–
When recording motion pictures
–
Recording still pictures while recording a motion picture [only when set to [
picture priorities)]
–
When [Filter Select] is set to [No Effect]
–
When [Quality] is set to [
–
When using [Time Lapse Shot]
–
When using [Stop Motion Animation]
], [
] or [
]
122
] (motion