Table of Contents
Advertisement
2. Getting Started/Basic Operations
Displaying/not displaying the histogram
>
[Custom] > [Histogram] > [ON]/[OFF]
MENU
You can set the position by pressing 3/4/2/1.
•
Direct touch operation is also possible from the recording screen.
•
A histogram is a graph that displays brightness along the
horizontal axis (black to white) and the number of pixels at each
brightness level on the vertical axis.
It allows you to easily check a picture's exposure.
A dark
B bright
•
When the recorded picture and the histogram do not match each other under the
following conditions, the histogram is displayed in orange.
–
When adjusting the exposure or when the Manual Exposure Assistance value in Manual
Exposure Mode is other than "0"
–
When the flash is activated
–
When suitable exposure is not achieved
–
When the brightness of the screen is not correctly displayed in dark places
•
The histogram is an approximation in the Recording Mode.
•
The histogram displayed in this camera does not match histograms displayed by picture editing
software used in PCs etc.
Displaying/not displaying the guide lines
>
[Custom] > [Guide Line] > [
MENU
•
The guideline is not displayed in the Panorama Shot Mode.
When [
] is set, guideline positions can be set by pressing 3/4/2/
1.
•
You can also set the position directly by touching [
of the recording screen.
]/[
]/[
]/[OFF]
] on the guideline
44
Advertisement
Table of Contents
