Panasonic Lumix DMC-GF7 Operating Instructions For Advanced Features page 258

11. Using the Wi-Fi function
Changing the connection method
∫
To change the connection method, follow the steps below:
> [DISP.] button > [New Connection] >
Wi-Fi
[Remote Shooting & View] > [DISP.] button
When connecting with [Via Network]:
On the camera
1
Select [Via Network].
•
Follow the connection procedure described on
access point.
On your smartphone
2
Turn on the Wi-Fi function.
3
Connect the smartphone to the wireless access point to which the camera is
connected.
4
Start "Image App".
When connecting with [WPS Connection]
On the camera
1
Select [Direct].
•
Follow the connection procedure described on
smartphone.
On your smartphone
2
Start "Image App".
¢ WPS is a function that allows you to easily set up a connection with a wireless LAN device
and make security-related settings. To check whether your smartphone supports the
function, refer to the operating instructions of the smartphone.
∫ Terminating the connection
After use, terminate the connection to the smartphone.
1
Press [Wi-Fi] on the camera.
(You can also terminate the connection by performing the following operations on the
recording screen:
2
On the smartphone, close "Image App".
(If you are using an iOS device)
On the screen of "Image App", press the home button to close the app.
(If you are using an Android device)
On the screen of "Image App", press the return button twice to close the app.
(P253)
(P253)
(P250)
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes].)
MENU
258
P288 to connect the camera to a wireless
¢ in [Direct]:
P290 to connect the camera to the