Aaeon AOP-8150WT User Manual page 43

O p e r a t o r P a n e l A O P - 8 1 5 0 W T
This article was previously published under Q294820
SYMPTOMS
If you are using a Universal Serial Bus (USB) CD-ROM drive to
®
install Windows 2000 on certain legacy-free computers, you may
receive a "Stop 0x0000007B" Inaccessible_boot_device error
message while booting from the installation CD. Because many
legacy-free computers do not have a standard CD-ROM drive or
floppy disk drive, the USB CD-ROM drive may be the only method
®
for installing or recovering Windows .
CAUSE
®
Windows 2000 Setup does not support certain USB CD-ROM
drives as bootable devices. This causes error message during the
Text-mode portion of Setup.
RESOLUTION
Please contact your computer manufacturer for information about
®
obtaining updated Windows 2000 Setup disks that you can use to
boot your computer with a USB CD-ROM device.
STATUS
Microsoft has confirmed that this is a problem in the Microsoft
products that are listed at the beginning of this article.
AOP-8150WT User's Manual 3rd Ed. -43-