Check the appliance is electrically safe and gas sound when you have nished.
7. Installation
Dear Installer
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
Installer's Name
Installer's Company
ArtNo.050-0011 - Installer information table
Installer's Telephone Number
Appliance Serial Number
Safety Requirements and Regulations
You must be aware of the following safety requirements &
regulations.
Before installation, make sure that the local
n
n
distribution conditions (nature of the gas and gas
pressure) and the adjustment of the appliance are
compatible.
This cooker is a Class 2 Subclass 1 appliance.
n
n
This appliance can be converted for use on another
n
n
gas.
The appliance must be installed in accordance with
n
n
the regulations in force and only in a well-ventilated
space.
Read the instructions before installing or using this
n
n
appliance.
Failure to install the appliance correctly could
n
n
invalidate any warranty or liability claims and lead
to prosecution.
INSTALLATION
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Particular attention shall be given to the
relevant requirements regarding ventilation.
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
This appliance is supplied set for:
G20 20 mbar
Cat II2H3+
Cat II2E+3+
Cat II2L3B/P
Cat II 2E3B/P
Cat II2H3B/P
Cat II2ELL3B/P
A conversion kit for another gas is available for the cooker.
If the appliance is to be converted to another gas we
recommend that this is carried out before installation.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
23