Deciding On An Installation Environment; Deciding On An Installation Site - Roland VersaUV LEF2-200 Setup Manual

Deciding On an Installation Environment

Deciding On an Installation Site

Install the machine in a quiet, stable location offering good operating conditions. An unsuitable loca-
tion can cause accidents, fire, faulty operation, or breakdown.
WARNING
WARNING
WARNING
WARNING
WARNING
CAUTION
Unsuitable installation sites
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
• Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy
P o in t
When you install the machine, check that all four rubber feet of the machine contact the ground.
If any of the rubber feet do not contact the ground, you can adjust their height by rotating them.
2.Installation
20
Install the machine in a location that is level, stable, and able to bear the
weight of the machine.
The total weight of the machine may reach 110 kg (242.5 lb.) or more. Installation in
an unsuitable location may cause a major accident, including tip over, fall, or collapse.
Never install the machine outside or in any location where exposure to
water or high humidity may occur.
Current leakage may cause electrical shock or fire.
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion may occur.
Install the machine in a clean, brightly lit location.
Working in a location that is dark or cluttered may lead to an accident, such
as becoming caught in the machine as the result of an inadvertent stumble.
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an
emergency. Install the machine next to an electrical outlet. Also, provide
enough empty space to allow immediate access to the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of com-
bustion due to ink fumes.