Automatic Printing - Riso RISOGRAPH RN2000 User Manual

Automatic
Printing
If you do not need to check print samples before making prints, press the AUTO
PROCESS key before pressing the START key to activate the Auto Process feature.
This feature enables nonstop operation from master-making through printing.
NOTE
If you need to check or adjust the print position, cancel the Auto Process
feature by pressing the AUTO PROCESS key again. Or, activate the [Semi-
Auto (Master)] feature in the Custom Initial Setting window.
Press the AUTO PROCESS key.
1
The Auto Process Indicator lights and the "Auto
Process" message appears in the Main Display.
Set an original into place.
2
Open the Stage Cover and place an original face
down on the Stage Glass. Close the cover gently
on the original.
= With the Optional ADF Unit =
Insert originals face down into the optional ADF
Unit until it stops. A maximum of 50 originals can
be placed on the optional ADF Tray at one time.
Enter the number of copies to be
3
printed.
If you enter a number incorrectly, press the C key
to reset the Print Quantity Display to "0," then
enter the correct number.
NOTE If "0" is selected as the print quantity, the
machine will not start.
Press the START key.
4
The specified number of copies are produced with
an extra proof copy.
☞ p.62 ....The Auto Process feature can be
32
saved in memory for quick recall.
ENLARGE
1 : 1
REDUCE
ZOOM
AUTO IDLE
CONFIDENTIAL
CUSTOM
SETTING SCANNING
CONTRAST
MULTI-UP DOT BOUND DATA
PRINT PHOTO ORIGINAL PC/SCAN
AUTO
PROCESS
AUTO
Ready to Make Master
Auto Process
Image Processing
Line (Auto)
Reproduction Size
START
Holding down the RESET key longer than one
second returns the Auto Process feature to the
initial setting.
☞ p.70 ....You can customize initial settings.
DUO
LINE MASTER
MAKING
AUTO
PHOTO PRINT
PROCESS
AUTO IMAGE PROCESS
PRINT POSITION
PROGRAM TEST
RESET
PRINT
CENTER
DENSITY
LIGHT DARK
STOP
START
NORMAL
SPEED
SLOW FAST
MEMORY
NORMAL
Scanning Contrast
yy ;; yy ;; ;; yy
yy ;; ;; yy ;; yy
A
Paper