Riso RISOGRAPH RN2000 User Manual page 27

• If the Main Display shows the PC data
mode window, press the Data Source
Selection key on the Sub control panel
to open the window for the stand-alone
operation mode (Scan data mode).
Before pressing this key in this case,
however, make sure no print job is
proceeding for any computer document
data. You can close the PC data mode
window safely when the window
displays to the right appear in the Main
Display.
Holding down the RESET key longer than one
second returns the control panel to the initial
settings.
☞ p.42 ...You can return to initial settings.
☞ p.70 ....You can customize the initial settings.
☞ p.62 ....Frequently used combinations of
settings can be saved in memory for
quick recall.
DATA
Ready to Make Master
PC/SCAN
PC Data Mode
Communication Mode
Doc.Data Spooling
Data Process Step
180 ° Rotation
Letter
Utility
Ready to Make Master
Select Pages/Action
Select with
Select Pg.1/10
Clear All Pages
< Back
Basic Operation
:Local
:OFF
:PC Selection
:OFF
Black
Rotate Details
and Start
All Pages (1/2/)
All Pages (/2/1)
Odd Pages (1/3/)
Odd Pages (/3/1)
Evn Pages (2/4/)
Evn Pages (/4/2)
Next >
Details
27