Paper Recommendations; Size And Weight Restrictions; Guides For Trouble-Free Use; Storing Environment - Riso RISOGRAPH RN2000 User Manual

Paper
Recommendations

Size and Weight Restrictions

Usable printing paper is as follows:
" × 15
Size: Max. 11 ⁄
1
2
" × 5
Min. 3 ⁄
1
2
The maximum printing area is as follows:
= RN2000 =
• Letter Cylinder (Drum) - 8
= RN2030/2130 =
• Legal Cylinder (Drum) - 8
= RN2050/2150 =
• B4 Cylinder (Drum) - 9
Important!
Do not use the following types of paper, as they can cause jams or misfeeds:
• Extremely thin paper (less than 13-lb bond, or 46 g/m
• Extremely thick or heavy paper (greater than 110-lb index, or 210 g/m
• Wrinkled, curled, folded, or torn paper
• Chemically treated or coated paper (such as thermal or carbon paper)

Guides for Trouble-Free Use

To prevent paper jams and misfeeds, follow the directions below:
• When using standard paper, set the Paper Feed Pressure Adjustment Lever and
the Paper Ejection Wing 1 Adjustment Lever to "NORMAL", select "Sandard" in the
Paper feed mode and open all four Paper Arrangers. ☞ pp.20-22
• When using thick paper (such as card stock), set the Paper Feed Pressure
Adjustment Lever and the Paper Ejection Wing 1 Adjustment Lever to "CARD",
select "Card Stock" in the Paper feed mode and open the two inner Paper
Arrangers. Note that the Paper Ejection Wing 2 Adjustment Lever should be
lowered as well. ☞ pp.20-22
• When using light-weight paper, set the Paper Feed Pressure Adjustment Lever and
the Paper Ejection Wing 1 Adjustment Lever to "NORMAL", select "Light-Weight" in
the Paper feed mode and open all four Paper Arrangers. ☞ pp.20-22
• When using slippery paper, set the Paper Feed Pressure Adjustment Lever to
"CARD". ☞ p.20
• Slide the Feed Tray Paper Guides, Receiving Tray Paper Guides, and Paper Stop
to fit the paper size. ☞ pp.20-22
• Use flat printing paper that is free of folds. If curled paper is unavoidable, place the
printing paper so that the curl faces down.
• Paper may stick to the Cylinder (Drum) surface if the top margin is too narrow on
the original or if the upper portion of the original uses a large amount of ink. To
solve this problem, lower the print position to provide a wider top margin or reverse
the top and bottom of the original. Then restart printing from the beginning. ☞ p.39

Storing Environment

Store printing paper in a level, dry area. Storing the paper in an excessively humid
area could cause paper jams as well as poor print quality.
After unpacking printing paper, keep the remaining paper wrapped and store it in a
moisture-proof box. It is highly recommended to put silica gel in the paper storage
18
box.
" (290 mm × 395 mm)
⁄
1
2
" (90 mm × 140 mm)
⁄
1
2
" × 11 " (210 × 290 mm)
⁄ ⁄
1 1
4 2
" × 14" (210 × 357 mm)
⁄
1
4
" × 14" (251 × 357 mm)
⁄
7
8
Weight: Max.110-lb index (210 g/m
Min. 13-lb bond (46 g/m
2 )
2 )
11 1 ⁄ "
2
)
2
13-lb bond
)
2
( 46 g/m )
1 ⁄
395mm 15 "
2
1 ⁄
3 "
2
110-lb index
⁄
1
5 "
<A6>
2
( 210 g/m )
290mm
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;;;
;;;;
;;;;
;;;;
;;;;
2
2