Changing Print Color; Changing Print Cylinders (Drums) - Riso RISOGRAPH RN2000 User Manual

Changing Print
Color
To print with an optional color Cylinder (Drum), simply
remove the existing Cylinder (Drum) from your
RISOGRAPH and replace with the color of choice.
When a Print Cylinder (Drum) other than the Black one is
in place, the "Color" message appears in the Main
Display.
Select Print Quantity
Image Processing
Line (Auto)
Reproduction Size
100%
Idle

Changing Print Cylinders (Drums)

Open the Front Cover.
1
Be sure that the Print Cylinder
2
(Drum) Release Button lights.
If not, press it. The Print Cylinder (Drum) will
rotate and stop at the release position, leading the
button to light.
NOTE If the Print Cylinder (Drum) Release
Button does not light, the Print Cylinder
(Drum) cannot be pulled out.
Pull out the Print Cylinder (Drum).
3
Grasp the Print Cylinder (Drum) Handle and pull
out the Print Cylinder (Drum) until it stops.
74
Scanning Contrast
yy ;; yy ;; ;; yy
yy ;; yy ;; yy ;;
A
Paper
Letter
Color
Caution
!
Only use RISOGRAPH RN Print
Cylinder (Drum).
NOTE
• Change Print Cylinder (Drum) with the
power ON.
• Store the removed Print Cylinder (Drum)
horizontally in the Print Cylinder (Drum)
case.
• Never store Print Cylinder (Drum) in an
upright position.
Print Cylinder
(Drum) Release
Button