Selecting the
Bluetooth
receiver
Setting up
audio transfer
Playback
functions
Start and
pause
playback
/
Stop playback
Switch track
/
Operating the Bluetooth Receiver
The
's integral Bluetooth interface provides a means of transferring
music wirelessly from devices such as smart-phones, tablet PCs, iPods,
etc. to the
.
For a successful audio Bluetooth transfer from a mobile device to the
the mobile device must support the A2DP Bluetooth audio transfer
protocol.
Select the 'Bluetooth receiver' source by pressing the button on
the remote control handset.
The machine's integral screen now displays 'BT Receiver' as source.
Before music from a Bluetooth-capable device can be played through the
, the external device must first be registered to the
the
is switched on and no device is connected, it is always ready to
receive. In this state the screen displays the message 'not connected'.
This is the procedure for establishing a connection:
Start a search for Bluetooth equipment on your mobile device.
•
When it finds the
•
Once the connection is successfully established, the message on the
's screen switches to 'connected to YOUR DEVICE'.
If your device requests a PIN code, this is always '0000'.
Due to the large number of different equipment on the market, we are
only able to provide a general description for setting up the radio
connection. For detailed information please refer to the operating
instructions supplied with your device.
Information on the piece of music being played is displayed on the
integral screen of the connected mobile device. If possible we
recommend that you leave the screen backlight switched on permanently
to ensure that it is clearly legible.
Some Bluetooth devices which support the AVRCP protocol can be
controlled by
's F100 remote control handset.
The behaviour and method of operating the connected mobile device are
determined by the device itself. In general terms the function of the
buttons the F100 remote control handset are as follows:
The / buttons on the remote control handset or the front
panel are used to start and pause playback (PLAY / PAUSE function).
Pressing the button halts playback.
A brief press on the / buttons during playback causes the
device to jump to the next or previous piece of music within the current
playlist.
, make the connection to your mobile device.
64
. As long as