Slumber Function - T+A Cala User Manual

Activate
slumber
function
Change the
slumber time
Turn off
slumber
function
 
 
Slumber-function
The machine has a slumber function that switches it to standby after a
selectable time interval between 15 minutes and 12 hours. This selection
can be done in steps of 15 minutes.
While the   is powered up keep the  key of the remote control
 
pressed until the display shows the slumber time.
While the slumber function is active the slumber time can be modified in
steps of 15 minutes using the  / -keys. Any change comes
immediately into effect.
While the slumber function is active it can be turned off by keeping the
 key pressed until the displaying of the slumber time is not shown
any longer on the display. After switching the function off the device can
be operated in the usual way. Alternatively the slumber function is also
ended when the   is switched off.
 
As long as the slumber function is active there is no other user operation
possible besides the slumber functions mentioned above and the changing
of the volume.
56