Alarm Timer; Alarm Timer Menu - T+A Cala User Manual

 
 
Alarm function
- with automatic
power-off
Switching the
Timer off
 
 
Calling up and
operating the
menu

Alarm Timer

The machine features an integral Timer module which is capable of
switching the   on with a selectable source at a programmable time
 
(alarm clock).
Selecting an alarm timer in the Alarm Timer menu switches the function
on and activates it. You can now switch the 
itself on at the pre-set time for as long as the set time is displayed on the
screen.
This function is only possible if the 'Comfort stand-by' mode has been
selected.
If the Timer is active, the 
time. Once switched on, a bell symbol flashes on the screen.
The   switches itself off automatically one hour after the alarm time,
 
unless the alarm function is disabled during this period.
The alarm function can be disabled by operating or switching off the
device. If the alarm function is disabled, the time display and bell
disappears. If the timer is disabled by operating the device it now does
not switch itself off automatically after an hour! If you wish to switch the
machine off, you must do so manually by pressing the  button.
A long press on the  button calls up the Alarm Timer menu, where
the timer can then be disabled.
A brief press on the  button calls up the Alarm Timer menu even
when the machine is switched off.

Alarm Timer menu

A long press on the  button calls up the menu.
•
When you open the menu, you will hear the currently set alarm source
•
at the currently set alarm volume.
The screen displays the following Select points:
•
Use the  /  to select a point in the menu.
•
If you wish to change a selected menu point, first press the 
•
button, and then use the  /  buttons to alter the value.
To accept the setting once you have altered the value, press the
•
 button again.
 switches itself on at the programmed alarm
 
54
 off. The   will switch
   