Operating The Bluetooth Source; Connecting The Aerial; Selecting The Bluetooth Audio Source; Setting Up Audio Transfer - T+A MP 3100 HV User Manual

Connecting the aerial

Selecting the Bluetooth
Audio source

Setting up audio transfer

Playback functions
40

Operating the Bluetooth source

The MP 3100 HV's integral Bluetooth interface provides a means of transferring
music wirelessly from devices such as smart-phones, tablet PCs, etc. to the
MP 3100 HV.

For a successful audio Bluetooth transfer from a mobile device to the
MP 3100 HV the mobile device must support the A2DP Bluetooth audio transfer
protocol.
An aerial must be connected to the unit for
Bluetooth transmission. The aerial is
connected to the socket marked
'BLUETOOTH ANT' on the MP 3100 HV.
The aerial should be set up free-standing
using the magnetic base supplied in the
set; this ensures maximum possible range.
Please refer the wiring diagram shown in
Appendix A.
First choose BLUETOOTH as listening source by opening the source selection
menu on the FD100 remote by pressing the -button or by turning the
SOURCE-Knob on the front panel of the MP 3100 HV.
Before music from a Bluetooth-capable device can be played through the
MP 3100 HV, the external device must first be registered to the MP 3100 HV.
As long as the MP 3100 HV is switched on and no device is connected, it is
always ready to receive. In this state the screen displays the message 'not
connected'.
This is the procedure for establishing a connection:

Start a search for Bluetooth equipment on your mobile device.

When it finds the MP 3100 HV, make the connection to your mobile
device.
Once the connection is successfully established, the message on the
MP 3100 HV's screen switches to 'connected to YOUR DEVICE'.

If your device requests a PIN code, this is always '0000'.

The procedure for establishing a connection can only be made if the Bluetooth
source is activated (see chapter "Basic settings of the MP 3100 HV").

Due to the large number of different equipment on the market, we are only able
to provide a general description for setting up the radio connection. For detailed
information please refer to the operating instructions supplied with your device.
Information on the piece of music currently being played is displayed on the
screen of the MP 3100 HV if this function is supported by the device connected
to the unit.
The behaviour and method of operating the connected mobile device are
determined by the device itself. In general terms the function of the buttons of
the MP 3100 HV or the FD100 remote control handset are as follows: