Related Manuals for T+A MP 2500 R
Summary of Contents for T+A MP 2500 R
- Page 1 USER MANUAL R-SERIES 2000 MP 2500 R Software Version V 1.1 Order number 9103-0537 UK...
- Page 3 Welcome. We are delighted that you have decided to purchase a product. With your new MP 2500 R you have acquired a top- quality piece of equipment which has been designed and developed with the wishes of the audiophile music lover as absolute top priority.
- Page 4 The update process takes only a few minutes. See the chapter entitled “Software update” for how to update your device via the internet connection. We recommend you to check for updates before using your MP 2500 R for the first time. To keep your device up to date you should check for updates from time to time.
-
Page 5: Table Of Contents
Operating the sources in detail ....................21 Operation with the FM1000 remote control ......................21 Operation of the MP 2500 R with controls on the front panel of the device ............21 Favourites lists ............................22 General information ............................22 Calling up the Favourites list .......................... - Page 6 Setting up audio transfer ........................... 40 Playback functions ............................40 Controlling the MP 2500 R ..........................41 NOTES ................................41 The MP 2500 R as D/A Converter ......................42 General Information on ............................. 42 D/A Converter Operation ........................... 42 Selecting a ................................ 42 D/A Converter Source ............................
- Page 7 System-requirements ............................43 Installing drivers ..............................43 Settings ................................43 Notes on ................................43 software ................................43 Notes on ................................43 operation ................................43 Notes on setting up ............................43 Installation, Using the system for the first time, Safety notes ....44 Back panel connections ......................
- Page 8 Firmware update ......................... 57 Glossary / Supplementary Information ..................58 Technical description Digital filters / Oversampling ............... 59 Network Terminology ......................... 61 Trouble shooting ........................63 Appendix A ..........................67 Wiring diagram ..............................67 Appendix B ..........................70 Specification ............................... 70...
-
Page 9: Introduction
This applies both at the digital and analogue level. For this reason the MP 2500 R employs two separate digital sections and two D/A converter sections - each optimised for one format. -
Page 10: Front Panel Controls
Front panel controls All the important functions of the MP 2500 R can be controlled using the buttons and the rotary knob on the front panel. Direct-acting buttons are provided for fundamental functions such as source select. Functions which are needed less frequently are controlled using a menu which is called up by pressing the ... - Page 11 Operating buttons Brief press: displays the Favourites list stored on the MP 2500 R (see chapter 'Operating the radio, Favourites list’ and 'Operating the Streaming Client, accessing media content via the Favourites list’) In the list a Favourite can be selected using the SELECT knob; a brief press on the same knob then plays it.
- Page 12 Display The graphic screen of the MP 2500 R displays all information regarding the status of the machine, the music track currently being played and the radio station currently tuned. The display is context-sensitive and varies according to the capabilities and facilities of the service or medium to which you are currently listening.
- Page 13 Indicates the field strength of the radio signal. If the symbol appears while playing back from a digital input - the MP 2500 R has switched over to its internal precision oscillator (local oscillator). This eliminates jitter effects, but is only possible if the clock quality of the connected...
-
Page 14: Remote Control
In general terms the remote control buttons have the same function as the corresponding buttons on the MP 2500 R’s front panel. The buttons not required to operate the MP 2500 R are not shown in the illustration of the FM1000. ... - Page 15 Activates the sort function within a Favourites list. Displays the Favourites list created on the MP 2500 R Switches the display from the track list / station list navigation to the ‚Now Playing‘ view.
-
Page 16: Basic Settings Of The Mp 2500 R
Basic settings of the MP 2500 R System Settings (System Configuration menu) In the System Configuration menu general device settings are adjusted. This menu is described in detail in the following chapter. Briefly press the button on the front panel or button on the... -
Page 17: Source Names
MP 2500 R. Device name This menu point can be used to assign an individual name to the MP 2500 R. In menu item a home network the device then appears under this name. -
Page 18: Energy Saver
If access data for the selected music service has already been stored, the new data will overwrite them. To use the new access data you must first perform a “Logout” for the service in question, then switch the MP 2500 R off and on again. -
Page 19: Fd 100 Pairing
Gateway module is installed; this is available as an optional extra. When you call up this menu point, the MP 2500 R attempts to create a connection with the FD 100 radio remote control. ... -
Page 20: D/A Converter Settings
D/A Converter Settings A number of special settings are available for the MP 2500 R D/A converter; they are designed to fine-tune the characteristics of your amplifier to suit your listening preferences. The following settings can only be called up if PCM-encoded audio is being played. -
Page 21: Selecting Sources In An Integrated System
Selecting sources in an integrated system MP 2500 R in a system with If the MP 2500 R is part of a system which includes a PA 2x00 R, and is the PA 2x00 connected via the R2 connection, the MP 2500 R sources are not selected Link directly using the FM1000’s (handset supplied in the set) source select buttons... -
Page 22: Favourites Lists
Instead it is usually possible to add Favourites and Playlists on-line via the provider’s account. These can then be called up and played via the MP 2500 R. The first step is to switch to one of the sources listed above. -
Page 23: Selecting A Favourite From The List
Press the button to call up the Favourites list. Selecting a favourite from the list Use the / buttons to select a stored item from the Favourites list. The selected favourite is displayed in enlarged form. ... -
Page 24: Operating The Radio
Operating the radio The MP 2500 R features an FM tuner (VHF radio), a DAB / DAB+ receiving section (digital radio) and also includes the facility to stream Internet radio. The following section describes in detail how to operate the individual radio sources. -
Page 25: Automatic Station Search
A long press on the button on the front panel or on the on the Automatic station search FM1000 calls up the Station list menu. The following Select points are available: If you wish to create a new station list, select the item “Create new list” and confirm your choice with . -
Page 26: Switching Radio Text On And Off
The Mono and Stereo symbols are only shown in the detailed screen display. DAB - Radio Briefly tap the button on the front panel of the MP 2500 R or the Selecting DAB radio button on the FM1000 remote control handset, repeatedly if necessary, until the source “DAB Radio”... -
Page 27: Automatic Station Search
A long press on the button on the front panel or on the on the Automatic station search FM1000 calls up the Station list menu. The following Select points are available: If you wish to create a new station list, select the item “Create new list” and confirm your choice with . -
Page 28: Internet-Radio
Internet-Radio Briefly tap the button on the front panel of the MP 2500 R or the Selecting Internet Radio as source button on the FM1000 remote control handset, repeatedly if necessary, until the source “Internet Radio” is displayed on the screen. -
Page 29: Front Panel Display
Front panel display While playing back the MP 2500 R can be switched to either of two different screen displays with a long press on the button: Large-format display: Enlarged display of the most important information, clearly legible even from a distance ... -
Page 30: Operating Music Services
Future music services and others which are not currently supported may be added subsequently by updates to the firmware of the MP 2500 R. Briefly tap the button on the front panel of the MP 2500 R or the Selecting the music service button on the FM1000 remote control handset, repeatedly if necessary, until the source “Internet Radio”... -
Page 31: Search Function
Often these folders are named “My music”, “Library”, “Favourites” or similar. Front panel display While playing back the MP 2500 R can be switched to either of two different screen displays with a long press on the button: Large-format display:... -
Page 32: Operating The Scl Source (Streaming Client)
CD. The quality level may even exceed that of SACD and DVD-Audio. Briefly tap the button on the front panel of the MP 2500 R or the Selecting the SCL source button on the FM1000 remote control handset, repeatedly if necessary, until the source “SCL”... -
Page 33: Playback Of Directories
Press the button to erase any letter. After pressing the button or after a brief delay with no further input the MP 2500 R moves to the first entry in the list which starts with the characters you entered. -
Page 34: Playing Usb Memory Media (Usb Media Source)
USB norm. Normed 2.5 inch USB hard discs can be connected to the socket directly, without requiring their own mains PSU. Briefly tap the button on the front panel of the MP 2500 R or the Selecting USB Media as source button on the FM1000 remote control handset, repeatedly if necessary, until the source USB MEDIA is displayed on the screen. -
Page 35: Playback Of Directories
Press the button to erase any letter. After pressing the button or after a brief delay with no further input the MP 2500 R moves to the first entry in the list which starts with the characters you entered. -
Page 36: Operating The Disc Player
It is also shows the current mode of operation, e.g. Front panel display In CD mode the MP 2500 R can be switched to either of two different screen displays with a long press on the button: ... -
Page 37: Playing A Cd
You can also enter the number of the desired track directly using the numeric buttons on the remote control handset. Playback mode The CD player in the MP 2500 R features various playback modes. During playback the current playback mode is shown on the screen. Repeat Brief press: ... -
Page 38: Special Features With Super Audio Cd (Sacd)
However, there are a few examples which are pure multi-channel discs, i.e. without a stereo audio track. Since the MP 2500 R is designed to reproduce pure stereo sound only, it is not possible to play back multi-channel discs. -
Page 39: Playback Program
This can be useful, for example, when you are preparing a cassette recording. A playback program can only be created for the CD currently in the disc drawer of the MP 2500 R. The program remains stored until it is erased again, or until the CD drawer is opened. -
Page 40: Operating The Bluetooth Source
MP 2500 R, the external device must first be registered to the MP 2500 R. As long as the MP 2500 R is switched on and no device is connected, it is always ready to receive. In this state the screen displays the message 'not connected'. -
Page 41: Controlling The Mp 2500 R
Controlling the MP 2500 R The MP 2500 R can also be controlled from the mobile device (Start/Stop, Pause, Volume, etc.). To control the MP 2500 R the mobile device must conform to the Bluetooth AVRCP protocol. Please note that many AVRCP-capable mobile devices do not support all the MP 2500 R’s control functions. -
Page 42: The Mp 2500 R As D/A Converter
The MP 2500 R features two optical and two electrical S/P-DIF digital inputs on the back panel to allow this usage. A USB-DAC input on the back panel permits to use the MP 2500 R as D/A converter for computers. ... -
Page 43: Usb Dac Operation In Detail
Never connect or disconnect the USB connection while the system is running. Notes on setting up Do not set up the MP 2500 R on or immediately adjacent to the computer to which it is connected, otherwise the device could be affected by interference radiated by the computer. -
Page 44: Installation, Using The System For The First Time, Safety Notes
Installation, Using the system for the first time, Safety notes This section describes all those matters which are of fundamental importance when setting up and first using the equipment. This information is not relevant in daily use, but you should nevertheless read and note it before using the equipment for the first time. -
Page 45: Back Panel Connections
It can be connected to the CD-input (line input) of any stereo BALANCED pre-amplifier, integrated amplifier or receiver. The MP 2500 R features a 75 aerial input FM ANT, which is suitable both for RADIO ANT a normal domestic aerial and a cable connection. For first-class reception... - Page 46 DSD256 and DSD512 only with a Windows PC. If you wish the MP 2500 R to convert audio files from a Windows PC connected to it, you must first install the appropriate drivers on the computer. No drivers are required if you are using a Linux or MAC computer (see the chapter ‘USB DAC operation in detail’).
-
Page 47: Installation And Wiring
When you connect the output sockets of the MP 2500 R to the input sockets of the amplifier, always connect like to like, i. e. 'R' to 'R' and 'L' to 'L'. If you fail to heed this then the stereo channels will be reversed. -
Page 48: Loudspeaker And Signal Cables
Loudspeaker and signal Loudspeaker cables and signal cables (inter-connects) have a significant influence on the overall reproduction quality of your sound system, and their cables importance should not be under-estimated. For this reason recommends the use of high-quality cables and connectors. Our accessory range includes a series of excellent cables and connectors whose properties are carefully matched to our speakers and electronic units, and which harmonise outstandingly well with them. -
Page 49: Safety Notes
Safety notes For your own safety please consider it essential to read these operating instructions right through, and observe in particular the notes regarding setting up, operation and safety. Please consider the weight of the device. Never place the device on an unstable Installation surface;... -
Page 50: Over Voltage
Over voltage The unit may be damaged by excess voltage in the power supply, the mains circuit or in aerial systems, as may occur during thunderstorms (lightning strikes) or due to static discharges. Special power supply units and excess voltage protectors such as the 'Power Bar' mains distribution panel offer some degree of protection from damage to equipment due to the hazards described above. -
Page 51: Network Configuration
The MP 2500 R can be operated in wired LAN networks (Ethernet LAN or Powerline LAN) or in wireless networks (WLAN). If you wish to use your MP 2500 R in your home network, you must first enter the necessary network settings on the MP 2500 R. This includes entering the network parameters such as the IP address etc. -
Page 52: Closing The Menu
Once you have correctly set all the parameters, select the menu item 'Store and exit?', then press the button. This action causes the MP 2500 R to accept the settings, and you should see the available network media sources (Internet radio, UPnP-AV server, etc.) displayed in the main menu. -
Page 53: The Configuration For A Wired Ethernet Lan Or Power-Line Lan Connection
If your network includes a DHCP server, please select the ON setting at this point. In this mode an IP address is automatically assigned to the MP 2500 R by the router. The screen shows only the MAC address and the message DHCP state ON. -
Page 54: The Configuration For A Wlan Connection
The Configuration for a WLAN connection Check that there is no cable connected to the LAN socket of the MP 2500 R. Setting the parameters for a wireless network Switch the MP 2500 R on, open the System Configuration menu by pressing the ... -
Page 55: Connecting To Wlan Via The Wps-Function
The MP 2500 R supports WPS for WLAN setup. WPS (Wi-Fi Protected Setup) an easy process for establishing a secure WLAN connection. WPS can be used to connect the MP 2500 R with your router in a quick and convenient way. For that usage most modern routers have implemented the WPS function. -
Page 56: Fd 100 Radio Remote Control (Optional)
Select one - or optionally none - of the ‘F’ buttons, and confirm your choice by pressing the button. The FD 100 is now paired with the MP 2500 R, and is ready for use. For detailed information on using the FD 100 please refer to the operating... -
Page 57: Firmware Update
For updating the firmware of the MP 2500 R there is a convenient method which requires an existing Internet connection If you are operating the MP 2500 R in conjunction with a PA 2x00 R, the machine can also be updated via the R2 connection. -
Page 58: Glossary / Supplementary Information
Hiss suppression stations which cannot be received with reasonable quality. Preset The MP 2500 R can store all the settings for stations, any of which can be recalled simply by pressing a button. = station memory Many radio stations broadcast supplementary digital information simultaneously with the programme. -
Page 59: Technical Description Digital Filters / Oversampling
44.100 sampled values are available for each channel. In the MP 2500 R the audio data read from the CD is „multiplied“ to a higher sampling rate (352,8 kHz) before it is converted back into analogueue music signals. - Page 60 Oversampling 2 (Impulse optimised filter) Shortening the filter (lower coefficient) reduces the time range errors, albeit combined with a slight loss of linearity in the frequency range and damping performance. Frequency response and transient characteristics of the short FIR filter Oversampling 3 (Bezier-interpolator plus IIR-filter) In this process an ideal Bezier interpolator is combined with what is known as an IIR filter.
-
Page 61: Network Terminology
This router is also a constituent part of the network, and is assigned its own IP address. The MP 2500 R must also be informed of the address of the router (Gateway) to enable it to gain access to the outside world. - Page 62 (Network Attached Storage) storage device to which other devices have access. If the NAS server includes a UPnP-AV server service, then the MP 2500 R has access to media files stored on the NAS, and can play them back. Powerline-LAN In a Power-Line LAN data is transferred via the existing mains power cabling.
-
Page 63: Trouble Shooting
Trouble shooting Many problems have a simple cause and a correspondingly simple solution. The following section describes a few difficulties you may encounter, and the measures you need to take to cure them. If you find it impossible to solve a problem with the help of these notes please disconnect the unit from the mains and ask your authorised ... - Page 64 CD player The screen displays the Cause 1: message 'No Disc' when CD not inserted correctly. you close the CD drawer. Remedy: Place CD centrally in the drawer, printed face up. Cause 2: CD dirty. Remedy: Clean disc and insert again. Cause 3: CD damaged in the Table of Contents (TOC) area.
- Page 65 For proper operation the MP 2500 R needs at least one properly connected network device. This can be a LAN or WLAN network or a USB storage device. Remedy: If the MP 2500 R shall be operated without network (LAN / WLAN) please connect at least a USB stick. The message...
- Page 66 Ext3, Ext3 file systems. Note: For big music archives we recommend to use a NAS (network attached storage) device with a UPnP-AV server to which the MP 2500 R will connect via your home network. Problems occur with high- Cause:...
-
Page 67: Wiring Diagram
Appendix A Wiring diagram balanced (XLR) - Page 68 unbalanced (Cinch / RCA)
- Page 69 Attention! A properly set up home network with router must be installed and in operation to use the MP 2500 R. For the use of internet radio a DSL access to the internet is needed. For questions regarding setting up your network and internet connection please ask your system administrator or any network specialist.
-
Page 70: Specification
Appendix B Specification DISC-Player Formats SACD Stereo, CD, CD-R, CD-RW, SACD/CD Text Frequency response and dynamic SACD: 2 Hz - 44 kHz / 110 dB, CD: 2 Hz - 20 kHz / 100 dB Streaming Client Formats MP3, WMA, AAC, FLAC, OGG-Vorbis, FLAC, AIFF, ALAC, WAV PCM 32 …... - Page 71 Connections Analogueue outputs asymmetric co-axial (RCA) 2,2 V eff / 50 Ohm symmetric (XLR) 4,4 V eff / 50 Ohm Output digital 1x coax, IEC 60958 (LPCM) Digital inputs 4x S/P-DIF: 2x standard coax (192 kSps /24 bit) and 2x optical TOS- Link (96 kSps /24 bit) 1x USB: Device-Mode - up to 384 kSps / 32 bit (LPCM) and DSD512*, supports asynchronous data transfer.
- Page 72 T+A elektroakustik GmbH & Co. KG Planckstraße 9 – 11 D - 32052 Herford T +49 (0) 5221 / 7676-0 F +49 (0) 5221 / 7676-76 info@ta-hifi.com www.ta-hifi.com...