Network Settings - T+A Cala User Manual

Menu point
Display
brightness
Menu point
Comfort
standby
(Stand-by
mode)
Menu point
Language
 
 
Menu point
System /
Update
Sub-point
Update
   
Sub-point
Reset all for
region
Sub-point
Factory
settings
Sub-point
Code
The method of using this menu and its settings are described in detail in the Chapter Installation
/ Using the system for the first time, Network configuration (Page 72).
Here you can adjust the brightness of the screen in normal use to suit
your personal preference. The available settings are:
1 to 7
The   features two stand-by modes: ECO Standby with reduced
 
stand-by current drain, and Comfort Standby with additional functions,
but slightly higher current drain. You can select your preferred stand-by
mode in this menu point:
Off (ECO Standby): Active functions in ECO Standby mode: can only be
switched on by remote control
On (Comfort-Standby): The following expanded functions are available:
Alarm-timer, clock display and the automatic power on function for one of
the aux-inputs (A1 IN or A2 IN).
In this menu point it is possible to determine the language which is to be
used for the displays on the integral screen on the front panel of the 
The language used for any transferred data, e.g. from an iPod or an
Internet radio station, is determined by the device itself or the radio
station, and therefore cannot be selected on the 
At this menu point you will find seldom needed functions such as
software updates, regional setting for the tuner, activation of optional
special functions, and reset of default settings.
At this menu point you can check the software version of the individual
sub-assemblies / modules by pressing the  /  buttons. It is
also possible to initiate the update process via USB or LAN (Internet).
For detailed information about updating the software please visit our 
Homepage www.ta-hifi.com > Support > Hardware/Software.
At this menu point you can adjust the radio de-emphasis for your
particular region.
Here you can reset the machine to its original state, i.e. when it was
delivered. All settings are reset, and stored favourites etc. are erased.
At this menu point activated functions such as gapless playback (GPL
ok) are displayed. If you obtain a code to activate any optional special
functions, it can be entered here.

Network Settings

53
 .
 
 .
 