Remote Control - T+A Cala User Manual

Remote Control

Introduction
The infrared receiver for the remote control handset is located left of the
screen area of the   . There must be line of sight contact between the
 
F100 and the screen.
The following tables show the remote control buttons and their function
when operating the machine.
Switches the machine on and off

(red)
Direct source select buttons. If the machine is switched

off, pressing one of these buttons turns it on and at the
same time selects the corresponding source device.
Selects the Streaming Client function of the 

(Internet Radio, access to music servers).
Selects the analogue input A1 IN of the 

Selects the analogue input A2 IN of the 

Selects the Radio function of the 

Selects the Bluetooth Receiver function

Direct alpha-numeric input, e.g. track number, quick

station select, radio station.

abc
The buttons  and  are also assigned
...
special characters.

During the text input procedure you can use the
xyz
 button to toggle between numeric and alpha-

numeric input, and between capitals and lowercase
letters.
Switching between the following modes of operation:

STEREO and VIRTUAL SURROUND.
(green)
Switches sound on and off (MUTING)

(yellow)
Reduces / increases volume (volume control rocker)
-  +
(yellow)
Tone settings

Brief press opens the tone control settings menu:
Balance / Treble / Bass / Subwoofer / Loudness /
Sound field
The menu points are called up using the  /
 button, and can be altered using the  /
 buttons.
For more information on the tone controls please see
the Chapter 'Tone settings' (TONE menu).
46

 
  

 

 