Controling app
14
Remote control
General Information
In general terms the remote control buttons have the same function as the
corresponding buttons on the MP 2500 R's front panel.
The buttons not required to operate the MP 2500 R are not shown in the
illustration of the FM1000.
When the MP 2500 R is used within a system which includes a
PA 2x00 R connected using R2
differs to the following description. For details please see chapter entitled
"Selecting sources in an integrated system".
Switches the MP 2500 R on and off
Source select buttons
Selects the SCL function (e.g. access to music servers or
similar)
MP 2500 R's disc function
A brief press on this button selects the digital input you wish to
use. Press the button repeatedly until the desired input is
displayed on the screen.
Selects the USB DAC function (playback from a connected
computer), or selects the USB Media function (connected
USB memory media) of the streaming client.
Press this button twice if necessary until the desired
source appears on the screen.
Selects FM, DAB, or Internet radio as source. Press this
button repeatedly until the desired source appears on the
screen.
Selects Bluetooth as source.
Alpha-numeric input
Direct alpha-numeric input, e.g. track number, fast station select,
radio station.
The and buttons are also used for non-standard
abc
characters.
...
During text input you can switch between numeric and alpha-
numeric input, and between capitals and lower case by pressing
the button.
wxyz
Opens the setup menu for the source device just selected.
(Not all sources have their own Setup menu.)
Opens the system configuration menu
The MP 2500 R can be controlled by the App too.
For Apple (iOS)
, the method of source selection
Link
For Android