Alarm Menu - Motorola DSR-4410 Operator's Manual

Operating the DSR-4410
Mode Field
The Mode field allows the user to select the mode by which the user adjusts the Audio
Gain port. Press the4button until the cursor is at the Mode label, and press the Enter
button to move into the field. Press the56buttons to view the desired mode. There are
two options, Independent and Joint. Press the Enter button to exit.
Left and Right Fields
The Left and Right fields allow adjustment of the output level of the Left and Right audio
signals. Press the4button until the cursor is at the desired label, and press the Enter button
to move into the field. Press the56buttons to simultaneously adjust the output level for
the left and right audio signals. The default setting is zero. Press the Enter button to
confirm the selections.
The Right field is not editable when the Joint option is chosen for the Mode field.

Alarm Menu

Press the6button until the Alarm menu is located. This menu allows the user to set up
different bypass modes in case the unit goes into an alarm condition.
Trigger Field
Press the4button until the cursor is at the Trigger label, and press the Enter button to
move into the field. Press the56buttons to display the options
The Trigger field allows the user to select the trigger condition for which the alarm is
activated. When the alarm is activated the Alarm LED illuminates and the alarm relay
indicates an alarm condition. The alarm is activated for any of the following conditions:
• The tuner loses lock when the input is RF
• The unit cannot lock to the ASI input when the input is ASI
• The unit is unable to render video
• The unit is not authorized to access the selected service
• The unit loses power
DSR-4410 21