Port0 Setup And Port1 Setup Menus - Motorola DSR-4410 Operator's Manual

Commercial integrated receiver/ decoder

Hide thumbs Also See for DSR-4410:

Table of Contents

When the DCII-Man option in the Mode field is selected the user must additionally specify

a Symbol/Code/Format combination.

This menu is not available when the ASI In option is chosen. That option is located in the

Manual Tune menu.

Mode Field

Press the4button until the cursor is at the Mode label, and press the Enter button to move

into the field. Press the56buttons to display the options: DCII-MAN, DCII-AUTO.

Select a mode and press Enter to exit the field.

NOTE:In DCII-MAN (manual) mode, the unit will only search for what is displayed in the Symbol/

Code/Format field. If DCII-AUTO has been selected the unit will search through all

available combinations to acquire a signal, and then remain parked on a signal once it is acquired.

Symbol/Code/Format Field

Press the4button until the cursor is at the Symbol label, and press the Enter button to

move into the field. Press the56buttons to display the options. Using the56buttons,

scroll through the Symbol/Code/Format combinations. Select the combination provided by

your programmer and press Enter to return to top menu.

This field is not available when the DCII-Auto option in the Mode field is selected.

Port0 and Port1 Setup Menus

In order to use virtual channels one or both ports must be associated with a particular

satellite and polarity. These menus allow the user to associate the satellite and polarity

with Port0 and Port1. Press the56buttons until the Port0 Setup menu or Port1 Setup

menu appears.

DSR-4410

Operating the DSR-4410

Table of Contents

Show Quick Links

Table of Contents