Motorola DSR-4410 Operator's Manual page 52

3
Cue Tone Signal (Cue Tone Sig) Field
The Cue Tone Sig (Signal) field lets the user turn the cue tone test on and off. Press
the4button until the cursor is at the Cue Tone Sig label, and press the Enter button to
move into the field. Press the56buttons to display the options. If On is selected, the unit
will generate a DTMF code 0-9*#ABCD on the cue tone output. This test will keep
repeating until the Off option is selected or the Enter button is pressed to exit the field.
46