Pre-Installation - Ketra N3 Installation Manual

Turn OFF electrical power to all circuit breakers feeding into the panel
Improper use or installation can cause SERIOUS INJURY, DEATH,
This device should be protected by a 20amp circuit breaker.
This device includes a two-way radio. For optimal performance and
•
• Use non-metal enclosures (e.g. plastic, fiberglass or PVC)
Product is plenum-rated for non-air-handling spaces.
If placed in enclosure alongside other electrical components, take
necessary precautions regarding operating temperatures.
Product is UL surface mount listed. Does not require dedicated
This product contains both class one and class two electrical
connections. The sections are physically separated by a barrier.
MAINTAIN PHYSICAL SEPARATION BOTH INSIDE AND OUTSIDE OF
DEVICE IN ACCORDANCE WITH ELECTRICAL CODES.
This device must be installed by a licensed electrician in
accordance with all national and local codes.
PAGE 6
P R E - I N S TA LL ATI O N
!
before installing or servicing this product.
!
OR LOSS/DAMAGE OF PROPERTY.
signal integrity:
Do not install in third-party metal enclosures
Product is direct-insulation contact rated.
WA R N I N G
WA R N I N G
enclosure.
770-000014-01-01
!
!
N3
INSTALLATION INSTRUCTIONS