Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Ketra Manuals
  4. Lighting Equipment
  5. N3 Satellite
  6. Installation manual

Ketra N3 Installation Manual

Hide thumbs Also See for N3:

Advertisement

Quick Links

N3
I N S TA L L AT I O N G U I D E
Supported Model – Revision 3, Firmware version 1.2.
N3
INSTALLATION INSTRUCTIONS
770-000014-01-01
PAGE 1

Advertisement

loading

Related Manuals for Ketra N3

Summary of Contents for Ketra N3

  • Page 1 I N S TA L L AT I O N G U I D E Supported Model – Revision 3, Firmware version 1.2. INSTALLATION INSTRUCTIONS 770-000014-01-01 PAGE 1...
  • Page 2 WA R N I N G Shock Hazard. May result in serious injury or death. Turn power OFF at circuit breaker or remove fuse. Damage to this product caused by wiring with power on voids the warranty. Due to risk of electric shock, a licensed electrician should install this power supply unit in strict compliance with the National Electric Code and any state or local code which may apply.

  • Page 3: Table Of Contents

    TA B LE O F CO NTE NT S Product Overview................. page 4 Contents....................page 5 Pre-Installation..................page 6 Installation....................page 8 Warranty....................page 16 INSTALLATION INSTRUCTIONS 770-000014-01-01 PAGE 3...

  • Page 4: Product Overview

    P RO D U C T OV E RVI E W Ketra’s N3 Satellite provides several vital system functions: control of luminaires, integration of third-party control and lighting products, and on-board memory and astronomical time clock functionality. The N3’s wireless connectivity enables its installation in multiple, convenient locations.

  • Page 5: Contents

    Prepared By: Prepared By: Prepared By: CO NTE NT S • Enables Ketra’s luminaires to join the Ketra control network • Enables Ketra’s luminaires to join the Ketra control network • Enables Ketra’s luminaires to join the Ketra control network •...

  • Page 6: Pre-Installation

    P R E - I N S TA LL ATI O N WA R N I N G Turn OFF electrical power to all circuit breakers feeding into the panel before installing or servicing this product. WA R N I N G Improper use or installation can cause SERIOUS INJURY, DEATH, OR LOSS/DAMAGE OF PROPERTY.
  • Page 7 Pre-Installation Instructions: This product has numerous capabilities and functions. Not all uses will apply to each specific application. Wireless Network: Product needs to be within range of Ketra’s wireless network, KetraNet Mesh KetraNet Mesh is a wireless mesh network system in which each wireless device both sends and receives data commands.

  • Page 8: Installation

    I N S TA LL ATI O N Before Physical Mounting: Note the serial number and product location; this information will be useful later in the installation. (The serial number can be found on the top of the control board cover - see fig. 1.) Status Monitor Activity DALI...
  • Page 9 I N S TA LL ATI O N Physical Mounting Procedure: 1. Remove the lid. (Note that screws are captive and need not be fully removed from lid - see fig. 3.) 2. Remove plastic plugs from knock-outs as required. (see fig. 4) 3.
  • Page 10 I N S TA LL ATI O N Mounting Holes 3/16 inch hole WARNING: DO NOT CONNECT AC SUPPLY TO TERMINALS MARKED “TRIAC CONTROL.” AC Input Wiring Procedure: 1. Connect AC supply. Use conduit or NM type cable as appropriate. (Note: acceptable wire is both solid core and stranded.
  • Page 11 I N S TA LL ATI O N WARNING: DO NOT CONNECT AC SUPPLY TO TERMINALS MARKED “TRIAC CONTROL.” INSTALLATION INSTRUCTIONS 770-000014-01-01 PAGE 11...
  • Page 12 I N S TA LL ATI O N WARNING: DO NOT CONNECT AC SUPPLY TO TERMINALS MARKED “TRIAC CONTROL.” AC Output Wiring Procedure: 1. Connect power and signal output to G2 Linear luminaires. Note: Details on G2 Linear connections available in G2 Installation Guide.
  • Page 13 I N S TA LL ATI O N INSTALLATION INSTRUCTIONS 770-000014-01-01 PAGE 13...
  • Page 14 I N S TA LL ATI O N Overview of Third Party Controls: The class 2 control input/output compartment enables interface with numerous devices. Choose appropriate terminals based upon your application. Sections Include: Analog I/O This section contains four ports. Each port can be configured independently to be any of the following control types (refer to applicable protocol wiring diagrams): •...
  • Page 15 Optional: If data is present at any control port, appropriate LED will indicate status. • Disconnect power and install cover. • Restore power and configure device using Ketra Design Studio Software. • For software download and updates, visit software.goketra.com. INSTALLATION INSTRUCTIONS...

  • Page 16: Warranty

    For questions and technical support please contact: +1.512.872.4357 support@goketra.com Change Your Light. Change Everything. +1.512.347.1100 www.goketra.com 3815 South Capital of Texas Highway Suite 100 • Austin • Texas 78704 © 2014 Ketra. Inc. All rights reserved. PAGE 16 770-000014-01-01 INSTALLATION INSTRUCTIONS...