Download  Print this page

Introduction - Canon AK1 Operation Manual

Finisher-ak1 saddle finisher-ak2 puncher unit-bt1-bu1
Hide thumbs

Advertisement

Introduction

Introduction
Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1
Finisher-AK1 and Saddle Finisher-AK2 can process jobs with the following settings:
• Sort by set
• Sort by page
• Offset stacking
• Stapling
• High-volume mode
• Saddle stitching (only when Saddle Finisher-AK2 is installed)
• Saddle folding (only when Saddle Finisher-AK2 is installed)
• Punching (only when Puncher Unit-BT1/BU1 is installed)
NOTE
• If you use paper weights lower than 64 g/m² (17 lb bond) for covers, the paper can crease
when saddle-stitched.
• If you use paper weights lower than 64 g/m² (17 lb bond) for covers when the Booklet Trimmer
is installed, the paper may be trimmed with uneven edges.
• If you use small paper, the paper may be saddle stitched with uneven edges. In this case,
check the width of the paper.
• If you use small paper, the paper may be stapled (corner/double) with uneven edges. In this
case, check the width of the paper.
• If you use small paper, and the Booklet Trimmer is used, the paper may be trimmed with
uneven edges. In this case, check the width of the paper.
• If you create a saddle-stitched booklet using coated paper or inserted sheets for the cover, the
image printed on the page after the cover may stick to the back of the cover, or back of the
inserted sheets, depending on the type of coated paper you are using.
• If you create a saddle-stitched booklet using coated paper for the cover, cracks may appear
around the fold of the cover, depending on the type of coated paper you are using.
• If you use staple (corner / double) multiple copy sets using coated paper for the cover, the
staples of copy sets may dirty the surface of the cover of copy sets that have already been
output, depending on the type of coated paper you are using.
10
Chapter 2 - Parts and their functions
Operation Guide Finisher-AK1, Saddle Finisher-AK2, Puncher Unit-BT1-BU1: VarioPrint (VP) 110, VP120, VP135 - Edition 2013-06
Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1

Advertisement

Table of Contents
loading

  Also See for Canon AK1

  Related Manuals for Canon AK1

This manual is also suitable for:

Bu1Ak2Bt1