Download  Print this page

Use The Joggers In The Output Trays - Canon AK1 Operation Manual

Finisher-ak1 saddle finisher-ak2 puncher unit-bt1-bu1
Hide thumbs

Advertisement

Use the joggers in the output trays

Use the joggers in the output trays
Introduction
The upper and lower trays of the stacker/stapler contain 2 joggers. The joggers make sure that the
stacks in the output trays are perfectly straight.
Possible jogger settings
In the Settings Editor, you can define when to use the joggers ([Preferences] -> [Print job defaults]
-> [Stacker/stapler]).
[Joggers] setting
[Always On]
[Off for mixed media sizes]
[Always Off]
20
Chapter 3 - Use the stacker/stapler
Operation Guide Finisher-AK1, Saddle Finisher-AK2, Puncher Unit-BT1-BU1: VarioPrint (VP) 110, VP120, VP135 - Edition 2013-06
Description
The joggers will always work.
The joggers will be disabled automatically when a print
job contains a mix of different media sizes.
The joggers will never be active. This can be recommen-
ded if the joggers cause pollution on the prints, for ex-
ample.
Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1

Advertisement

Table of Contents
loading

  Also See for Canon AK1

This manual is also suitable for:

Bu1Ak2Bt1