Download  Print this page

Clear A Paper Jam In The Saddle Stitch Unit - Canon AK1 Operation Manual

Finisher-ak1 saddle finisher-ak2 puncher unit-bt1-bu1
Hide thumbs

Advertisement

Clear a paper jam in the saddle stitch unit

Introduction
If a paper jam occurs in the saddle stitch unit of the stacker/stapler (Saddle Finisher), the control
panel will display the location of the paper jam and a procedure to clear the paper jam. Follow the
procedure on the control panel to clear the paper jam. The procedure below describes how to
clear a paper jam in the saddle stitch unit of the stacker/stapler.
CAUTION
• When you remove jammed originals or paper, take care not to cut your hands on the edges
of the originals or paper.
• When you remove jammed originals or paper, take care not to cut your hands on the inside
of the machine. If you cannot remove the paper, contact your local authorized dealer.
• Be careful when you handle optional units that are attached to the machine. When you open
the door or cover of an optional unit to replace a staple cartridge, discard the punch waste, or
clear paper jams or staple jams, prints may still be output if other optional units are
operating normally, and are not involved in the paper or staple jam removal procedure.
Clear a paper jam
Step
Action
1
Open the front door of the stacker/stapler.
2
Open the guide (F-C1).
3
Turn the upper dial (F-C2) in the direction
of the arrow (clockwise), to feed the jam-
med paper to the guide (F-C1).
Canon Finisher-AK1/Saddle Finisher-AK2/Puncher Unit-BT1/BU1
Clear a paper jam in the saddle stitch unit
Illustration
Chapter 4 - Troubleshooting
4
39

Advertisement

Table of Contents
loading

  Also See for Canon AK1

This manual is also suitable for:

Bu1Ak2Bt1