Advantech GMB-945GC User Manual page 48

S3(STR)
Run VGA BIOS if S3 Resume [Auto]
This item allows system to reinitialize VGA BIOS after system resume from
ACPI S3 mode.
Power Management [User Define]
This item allows user to select system power saving mode.
Min Saving
Max Saving
User Define
Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
Blank Screen
DPMS
Video Off In Suspend [Yes]
This item allows user to turn off Video during system enter suspend mode.
Suspend Type [Stop Grant]
This item allows user to determine the suspend type.
Modem use IRQ [3]
This item allows user to determine the IRQ which the MODEM can use.
Suspend Mode [Disabled]
This item allows user to determine the time of system inactivity, all devices
except the CPU will be shut off.
Soft-Off by PWR-BTTN [Instant-Off]
This item allows user to define function of power button.
Instant-Off
Delay 4 Sec
PowerOn by LAN [Enabled]
This item allows user to power on the system by LAN. The choices are
"Enabled" and "Disabled".
PowerOn by Modem [Enalbed]
This item allows user to power on the system by Modem. The choices are
"Enabled" and "Disabled".
USB KB Wake_Up From S3 [Disabled]
This item allows user to set USB keyboard wake up system from S3 Enable or
Disable.
PowerOn by Alarm [Disabled]
The choices are "Enabled" and "Disabled". Fields that follow below indicate
date of current month and time of alarm settings, if enabled.
PWRON After PWR-Fail [Former-Sts]
Use this to set up the system after power failure. The "Off" setting keeps the
system powered off after power failure, the "On" setting boots up the system
after failure, and the "Former-Sts" returns the system to the status before power
failure.
GMB-945GC User Manual
The system shuts down with the exception of a refresh current to
the system memory.
Minimum power management. Suspend Mode=1 hr.
Maximum power management. Suspend Mode=1 min.
Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.
chronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
Press power button then Power off instantly.
Press power button 4 sec. to Power off.
36