The Side Panel - TP-Link Archer C2600 User Manual

Item
Power On/Off
Antennas

1. 3. 3. The Side Panel

The router's side panel shows the USB ports and buttons (view from left to right). Refer to the following for detailed instructions.
Item
USB 3.0
WiFi On/Off
WPS
Reset
Chapter 1 . Get to Know About Your Router
The switch for the power. Press it to power on or off the router.
Used for wireless operation and data transmit. Upright them for the best Wi-Fi performance.
For connecting to a 3.0 USB storage device or a 3.0 USB printer. It is also compatible with USB 2.0 devices.
For turning on/off the WiFi function.
The switch for the WPS function. Pressing this button for less than 5 seconds enables the WPS function. If your
client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can press this button
to quickly establish a connection between the router and client devices and automatically configure wireless
security for your wireless network.
The switch for the reset function. There are two ways to reset the router's factory defaults.
Method one: With the router powered on, press and hold the Reset button for at least 10 seconds until all LEDs
light on (wireless LEDs may not light on if the WiFi on/off button is off). And then release the button and wait
the router to reboot to its factory default settings.
Method two: Restore the default setting from
based Management.
Description
Description
Backup and Restore Configuration Settings of the router's Web-
5