TP-Link Archer C2600 User Manual page 27

1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Basic or Advanced
disable Share All, then click
3. Select the Volume Name
4. Decide the way you share the folder:
• Allow Guest Network Access:
• Enable Authentication:
password to access the USB disk. Refer to
• Enable Write Access:
• Enable Media Sharing:
stored on the USB disk directly from DLNA-supported devices. Click
5. Click OK.
Tips:
The router can share 32 volumes at most. You can click
To Set up Authentication for Data Security
If you enable Authentication, network clients will be required to enter the username and password you set when accessing
the USB disk.
1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router.
2. Go to Advanced > USB Settings
Chapter 6 . USB Application
> USB Settings > Sharing
Add to add a new sharing folder.
and Folder Path, then enter a
If you select this check box, guest network can access to the this folder.
Select to enable authentication for this folder sharing, and you will be required to use a username and
To Set up Authentication for Data Security
If you select this check box, network clients can modify this folder.
Select to enable media sharing for this folder, and you can view photos, play music and watch movies
on the page to detach the corresponding volume you do not need to share.
> Sharing Access. Focus on the
Access. Focus on the Folder Sharing
Folder Name as you like.
Media Sharing
Sharing Account
section. Click the button to
to learn more.
to learn more.
section.
24