4 ) If you choose L2TP, enter the
Different parameters are needed according to the Secondary Connection.
5 ) If you choose PPTP, enter the username,
Different parameters are needed according to the Secondary Connection.
5.
Click
Save
to make the settings take effect. To check your Internet connection, click
Note:
It may take 1-2 minutes to make the settings valid.
6.
After the connection succeed, the screen will display as follows. Here we take PPPoE as an example.
Chapter 4 .
Set Up Internet Connection
username
and
password
and choose the
password
and choose the
Secondary Connection
provided by your ISP.
Secondary Connection
provided by your ISP.
Network Map
on the left of the page.
15