TP-Link Archer C2600 User Manual page 78

Ac2600 wireless dual band gigabit router

Hide thumbs Also See for Archer C2600:

Table of Contents

Change a web browser or computer and login again.

Reset the router to factory default settings: Press and hold the Reset button for at least 10 seconds and then release.

Note: You'll need to reconfigure the router to surf the Internet once the router is reset.

Open a web browser and login again. If login still fails, please contact the technical support.

Q4. How to use the WDS Bridging function to extend my wireless network?

For

example, my house covers a large area. The wireless network coverage of the router I'm using (the root router) is limited. I

want to use an extended router to extend the wireless network of the root router.

Note:

• WDS bridging only requires configuration on the extended router;

• WDS bridging function can be enabled either in 2.4GHz frequency or 5GHz frequency for a dual-band router. We use the

WDS bridging function in 2.4GHz frequency as an example.

Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

Configure the IP address of the router:

1 ) Go to

Advanced >Network

the root router; (For example, the IP address of the root router is 192.168.0.1, the IP address of the extended router

can be 192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)

2 ) Click Save.

Note:

FAQ

> LAN, configure the IP address of the extended router to be in the same subnet with

Table of Contents

Show Quick Links

Table of Contents