Create Static Routes - TP-Link Archer C2600 User Manual

4. Enter the username, password and domain name of the account (such as lisadns.ddns.net).
5. Click Login and Save.
Tips: If you want to use a new DDNS account, please
11. 5

Create Static Routes

Static routing is a form of routing that is configured manually by a network administrator or a user by adding entries into
a routing table. The manually-configured routing information guides the router in forwarding data packets to the specific
destination.
I want to:
How can I
do that?
Chapter 11 . Customize your network settings
Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the Internet, but I also want to visit my company's
network. Now I have a switch and another router. I connect the devices as shown in the following
figure so that the physical connection between my PC and my company's server is achieved. To surf
the Internet and visit my company's network at the same time, I need to configure the static routing.
LAN: 192.168.0.1
1. Change the router's LAN IP addresses to two different IP addresses on the same subnet. Disable
Router 2's DHCP function.
2. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
3. Go to Network > Advanced
4. Click Add to add a new static routing entry.
Logout first, then login with the new account.
Router 1
Router 3
192.168.0.100
Routing.
Router 2
WAN: 172.30.30.100
LAN: 192.168.0.2
PC 2
PC 1
172.30.30.1
55