Web Operation; Network Connection; Login And Main Interface - Illustra Essentials IES01CFACWSY User Manual

This series network camera products support the Web access and management via PC.
Web includes several modules: Monitor channel preview, system configuration, alarm and etc.

Network Connection

Please follow the steps listed below for network connection.
•
Make sure the network camera has connected to the network properly.
•
DHCP is enabled by default.
•
Please set the IP address, subnet mask and gateway of the PC and the network camera
respectively. Network camera default IP address is 192.168.1.168. Subnet mask is
255.255.255.0. Gateway is 0.0.0.0
•
Use order ping ***.***.***.***(* network camera address) to check connection is OK or not.

Login and Main Interface

Open IE and input network camera address in the address bar. See Figure 5- 1.
The login interface is shown as below. See Figure 5- 2.
Please input your user name and password.
Default factory name is admin and password is admin.
Note
For security reasons, please modify your password after you first login.
Figure 5- 1 IP address

Web Operation

Input your IP
address here
12