Table of Contents
Advertisement
toolkit is available from your au-
thorised BMW Motorrad retailer.
Front-wheel stand
Installing front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front-wheel stand without
also using the auxiliary stand
Risk of damage to parts if vehicle
topples
Place the motorcycle on an
auxiliary stand before lifting
the front wheel with the
BMW Motorrad front-wheel
stand.
Place the motorcycle on a suit-
able auxiliary stand.
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Use a suitable front-wheel
stand.
Loosen the mounting bolts 1.
Push the two adapters 2 apart
until the front forks fit between
them. Adjust the adapter studs
to suit the front suspension.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front wheel stand
relative to the front wheel and
push it into position at the front
axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten mounting bolts with
wheel 1.
9
157
z
Advertisement
Table of Contents
