Advertisement

F e d e r a l C o m m u n i c a t i o n s C o m m i s s i o n
S t a t e m e n t ( C l a s s A)
NOTE- This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by tuning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician
for help.
C l a s s A I T E :
Class A ITE is a category of all other ITE which satisfies the class A ITE
limits but not the class B ITE limits. Such equipment should not be
restricted in its sale but the following warning shall be included in the
instructions for use:
Warning - This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
C E C l a s s A ( E M C )
This product is herewith confirmed to comply with the
requirements set out in the Council Directives on the
Approximation of the laws of the Member States relating
to Electromagnetic Compatibility Directive 2004/108/EEC
Warning - This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures to correct this interference.
D I S C L AI M E R
No warranty or representation, either expressed or implied, is made with
respect to the contents of this documentation, its quality, performance,
merchantability, or fitness for a particular purpose. Information
presented in this documentation has been carefully checked for
reliability; however, no responsibility is assumed for inaccuracies. The
information contained in this documentation is subject to change without
notice.
In no event will AVerMedia be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability
to use this product or documentation, even if advised of the possibility of
such damages.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVerVision CP355 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Avermedia AVerVision CP355

  • Page 1 In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of...
  • Page 2 C O P Y R I G H T © 2009 by AVerMedia Information, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of AVerMedia INFORMATION, Inc.
  • Page 3: Table Of Contents

    Projector with DVI-I interface ........7 Connecting a Computer ..........8 Connecting a Computer via USB ........ 8 Connecting to a Microscope ........9 Setting Up AVerVision CP355......9 Camera Head ............. 9 LED Light Switch............9 Infrared Sensor ............10 Flexible Gooseneck and Arm ........
  • Page 4: Introduction

    3D objects onto a TV, LCD or DLP projector making presentations a snap. ® AVerMedia AVerVision CP355 AVerVision CP355 is an ideal presentation tool for business, academic, medical and the scientific community. Software & Manual CD Anti-glare Sheet...
  • Page 5: Optional Accessories

    34mm Microscope Adapter 28mm Microscope Adapter Light Box...
  • Page 6: Avervision Cp355 Parts

    The illustrations below identify the parts of AVerVision CP355 Camera head LED light Camera lens LED light switch IR sensor Control panel Right panel Gooseneck Rear panel (10) Left panel (11) Label slot (10) (11) (12) DC 12V port Right Panel...
  • Page 7: Technical Specifications

    Image Sensor 1/2.5”” Progressive Scan CMOS Pixel Count 3.2 mega pixels Frame Rate 24 fps (max.) White Balance Auto / Manual Exposure Auto / Manual Text / Graphics / High Frame / Wide Angle / Image mode Microscope / Macro / Infinite Effect Color / B/W / Negative / Mirror / Reverse / Freeze Analog RGB output...
  • Page 8: Making The Connections

    The ports on the rear, left and right panel of CP355 enable you to connect the unit to a computer, graphics display monitor or LCD/DLP projector, TV or other device. Illustrated below are the ports that are located at the rear, left and right panel of CP355 with their corresponding labels.
  • Page 9: Connecting The Power Adapter

    Port Description (8) USB Use CP355 as a USB Camera or transfer the captured images from CP355 memory to PC. Connect this port to the USB port of the computer. (9) TV-RGB switch Switch to output display video either from Video and S-VIDEO, or RGB and DVI-I output port.
  • Page 10: Lcd/Dlp Projector

    Locate the RGB (VGA) input port of the graphics display device and connect it to RGB OUTPUT port of CP355. Make sure the TV/RGB switch is set to RGB. RGB cable LCD/DLP projector CRT monitor LCD monitor MAC monitor Locate the DVI-I input port of the display device and connect it to DVI-I OUTPUT port of CP355.
  • Page 11: Connecting A Computer

    Locate the USB port of the computer or laptop and connect it to USB port of CP355. This enables you to use CP355 as a USB Camera and to transfer the captured images from the memory and to computer. Also see ““Transfer Image from AVerVision CP355 to PC””. Computer USB cable...
  • Page 12: Connecting To A Microscope

    Connecting the CP355 to a microscope enables you to examine microscopic objects on a big screen without straining your eyes. Make sure to connect the longer hook to the front latch hole of the camera head. Microscope Adapter 2.5cm 2.2cm Microscope This section provides useful tips on how to adjust the CP355 to meet your needs.
  • Page 13: Infrared Sensor

    Aim the remote control at the infrared sensor to operate the unit. Aim the remote control at the infrared sensor to operate the unit. The flexible gooseneck and arm design allows you to position the camera head from any angle. When positioning the camera head in upright position, press REVERSE on the remote control to rotate the image 180°...
  • Page 14: Using The Infrared Remote Control

    Use the CP355 Remote Control to enhance your presentation by having the ability to switch between three (3) presentation modes and access various features. To use the remote control, first insert the batteries (2 ““AAA”” size batteries are provided) into the battery compartment at the back of the remote.
  • Page 15 Name Function (4) ENTER Make a selection in Playback mode and OSD menu. Use this to quick zoom to 200% or back to 100% in Camera mode only. (5) MENU Pull up and exit the OSD main-menu and sub-menu. (6) CAMERA/PC Switch between Camera and PC mode.
  • Page 16 Name Function on feature. To exit AVerBox or AVerVisor mode, press CAMERA/PC to switch to Camera mode. PRESENTER AVERBOX AVERVISOR OFF SHADE COLOR RESIZE (10) PRESENTER - AVerBox overlays a frame on the presentation screen. Selecting SHADE changes the opacity of the area outside the box from 0%, 50% and 100%, COLOR to change the frame color from red, green and blue, and RESIZE to change the size of the...
  • Page 17 Name Function then press ENTER to save the setting and the bar will turn white. SLIDE SHOW START INTERVAL (13) AUTO IMAGE Automatically adjust and set the white balance and exposure setting. (14) FREEZE Toggle to pause or resume the camera. (15) REVERSE Rotate the image by 180°in Camera mode only.
  • Page 18: Touch Button Control Panel

    The touch button control panel located on the top side of the CP355 provides quick access to commonly used functions. (10) (11) (12) Function Description (1) POWER Turn the unit on/off. (2) Output LED Indicate the setting of the TV to RGB switch to which Indicator port the video signal is being sent out.
  • Page 19 Function Description Shuttle Wheel mode, or to make a selection and adjustment on the OSD main-menu and sub-menu (See Menu Functions for more details). (5) ENTER Make a selection in Playback mode and OSD menu. Use this to quick zoom to 200% or back to 100% in Camera mode only.
  • Page 20: Osd Navigation Tree

    Function Description (CAP/DEL) to make a selection, and press ENTER to save the setting. - Remove the selected picture from the built-in memory permanently in Playback mode. There are 2 tab menus in CP355: IMAGE and SETTING tabs. For TV output, the RESOLUTION will be disabled in SETTING menu list.
  • Page 21: Menu Functions

    SETTING MENU The MENU functions of CP355 enhance fine-tuning your screen display, set the timer, select OSD language and more. Press the MENU button to call up and exit from the main menu or sub-menu display. Use to select between IMAGE and SETTING menu list. Then use to select the items in the menu list.
  • Page 22 OSD Menu Description get close-up view from the subject in the range of 5 to MODE TEXT 20cm. GRAPHICS HIGH FRAME Infinite - set to view the subject far away from the WIDE ANGLE MICROSCOPE camera in the range of 55cm and beyond. MACRO INFINITY IMAGE >...
  • Page 23 OSD Menu Description WHITE BALANCE bar will turn white. AUTO WHITE BALANCE WHITE BALANCE BLUE AUTO AUTO BLUE BLUE IMAGE > CAPTURE CAPTURE SINGLE to select SINGLE or CONTINUOUS CONTINUOUS IMG SIZE capture mode and IMG SIZE to select the capture pixel size of the image.
  • Page 24 OSD Menu Description Please wait till the message ““FORMAT”” at the lower right corner of the screen disappear to finish the process. SETTING > RESOLUTION RESOLUTION 1024 x to choose from different supported display x 600 resolutions then press ENTER to make the selection. 1280 x This selection will be disabled in TV output mode.
  • Page 25: Rs-232C Diagram Connection

    CP355 can be controlled using a PC through RS-232 connection. S-Video/RS-232 cable Computer RS-232 cable Laptop (not supplied) Make sure the RS-232 cable matches the cable spec design. PC COM Port AVerVision RS-232 Port DSUB-9P (Female) DSUB-9P (Female) RI (CI) 1 bit Start bit 8 bit...
  • Page 26: Rs-232C Command Table

    Data Function Start Type Data Checksum Length POWER ENTER DOWN LEFT RIGHT PLAYBACK MENU PC/CAMERA AUTOIMAGE AUTOFOCUS FREEZE CAPTURE REVERSE TIMER EFFECT PRESENTER POWER ON POWER OFF This enables you to transfer the captured image from the built-in memory to PC. The instruction below MUST be read and followed BEFORE connecting the USB cable.
  • Page 27: Troubleshooting

    This section provides many useful tips on how to solve common problems while using the CP355. There is no picture on the presentation screen. 1. Check all the connectors again as shown in this manual. 2. Check the on/off switch of the display output device. 3.
  • Page 28: Limited Warranty

    You as the original purchaser. Except for the foregoing, the Product is provided ““AS IS.”” In no event does AVerMedia warrant that You will be able to operate the Product without problems or interruptions, or that the Product is suitable for your purposes.
  • Page 29: Limitation Of Liability

    AVERMEDIA’’S TOTAL, AGGREGATE LIABILITY FOR DAMAGES OF ANY NATURE, REGARDLESS OF FORM OF ACTION, SHALL IN NO EVENT EXCEED THE AMOUNT PAID BY YOU TO AVERMEDIA FOR THE SPECIFIC PRODUCT UPON WHICH LIABILITY IS BASED. Governing Law and Your Rights This warranty gives You specific legal rights;...

Table of Contents