Page 1
® ® User Manual AVerMedia ® Document Camera...
Page 3
This device has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial, industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.
Connecting an IBM Compatible PC or Macintosh Computer... 7 Connecting a Computer via USB Connection... 8 Installing the Optional Light Box ... 8 Connecting a Microscope... 9 Adjusting the AVerVision300i... 10 Camera Head ... 10 Mechanical Arm ... 10 Light and Document Positioning Pointer... 11 Anti-glare ...
Page 6
Timer Function... 16 Using the AVerVision Application... 18 Installing the Software... 18 Application User Interface ... 19 Image Download from AVerVision300i to PC... 22 OSD Navigation Tree ... 23 Menu Functions ... 24 Troubleshooting ... 27 Limited Warranty ... 29...
PC. While connected to a PC via USB cable, you can also capture and save images and video clips to your PC. It also comes equipped with a full-featured remote control. AVerVision300i is an ideal presentation tool for academic, business, medical and the scientific...
® AVerMedia AVerVision300i Power Adapter Power Cord * The power cord will vary depending on the standard power outlet of the country where it is sold. Remote Control User Manual (batteries included) Driver CD Anti-glare Sheet RCA Cable S-Video Cable...
Image Sensor Effective Pixels Frame Rate White Balance Exposure Image mode Effect Analog RGB output H Sync. Signal V Sync. Signal Image Signal Level S-Video, Composite Video Output Image Capture Built-in Memory Optics Lens Shooting Area Zooming Power Source Consumption Lighting Lamp type Input/Output...
The ports on the back and side panel of the AVerVision300i enable you to connect the unit to a computer, graphics display monitor or LCD/ DLP projector, TV or other devices. Illustrated below are the ports that are located at the back and side panel of the AVerVision300i with their corresponding labels.
You can connect the power adapter to a standard 100V~240V AC power source. AVerVision300i enables you to display a presentation on a VGA / MAC display monitor, or LCD/DLP projector. It also comes with a DVI output port that produces maximum video...
To display a presentation on TV, connect AVerVision300i to your TV by using the Video Cable or S-Video cable, switch the output mode to TV system by pressing the VGA / TV button on the remote control or control panel. If you are using a SCART RGB monitor, connect it by using the RCA to SCART cable.
Download the saved images from AVerVision300i’s built-in memory to your computer or access the software application as a PC cam via the USB cable. Select the function through OSD, then connect it. (Refer to the section, Using the AVerVision Application, for more details.)
Adjust the angle here at the ridged side 90 degrees 45 degrees AVerVision300i features a mechanical arm that enables you to project an image to its full height for full A4 paper landscape viewing. 75 degrees 92 degrees 60 degrees...
A unique feature of the AVerVision300i is the four (4) laser positioning pointers that define the viewing area, enabling you to correctly position the object at the center under the camera’s viewing area. 3 various light and laser position pointer settings are provided as follows.
Use the AVerVision300i Remote Control to enhance your presentation, switch between (3) three presentation modes and access various features. To use the remote control, first insert the batteries (2 size “AAA” batteries are provided) into the battery compartment at the back of the remote. Use the figure and descriptions below to help you use the remote control.
Page 19
Use Night View when you are presenting in a low-light condition. In Night View, the image of the object appears as though under normal NIGHT VIEW lighting conditions. The AVerVision300i automatically adjusts the exposure to compensate for the adverse condition. The captured image however, appears in slow motion.
A V e r V i s i o n 3 0 0 i p r o v i d e s q u i c k a c c e s s t o c o m m o n l y u s e d f u n c t i o n s . Function Switches to Camera mode and displays the image from the CAMERA MODE AVerVision300i’s built-in digital video camera. Switches to PC mode and displays the video signal coming from the PC MODE PC IN port.
- In Camera mode, press to capture an image. The captured image is automatically stored in the built-in memory card at 1024 x 768 CAPTURE/ resolution. DELETE - In playback mode, press to permanently remove the selected picture in preview mode or the displayed full sized picture. - Press MENU to call the OSD menu and then use the ▲, ►, ▼...
When using the remote control, aim at the Infrared Sensor, which is located at the front panel of the AVerVision300i. The AVerVision300i enables you to control the pace of your presentation by displaying the remaining time on the countdown screen. This merely serves as a reminder.
Page 23
To display the previously set time value, press the TIMER button once. The AVerVision300i automatically converts your settings to “hours:minutes:seconds” format. The maximum setting is 120 minutes. To start the countdown, press the TIMER button again. Once the countdown timer...
Use the AVerVision PC Camera applications provided to control the AVerVision300i to save any captured images or video clips to your PC, or send them via emails. Note: When a USB cable is connected between the document camera and the PC, the document camera features are controlled by the application software directly instead on the remote control.
After the installation, connect the USB cable between the AVervVsion300i and your PC. Open the applications by clicking “VisionAP” icon on your desktop.
Page 26
A. Basic Setting Function Digital Zoom and Pan Control Return to normal view (1X ) Linear/Fast zoom-in selection. Brightness adjustment Contrast adjustment Normal view without image rotate or mirror Rotate the image by 180°. Image mirroring Convert the image to Negative Convert the image to Black and White Back to the original image Function...
Page 27
Function Control the video display by controlling bar Play and control the video display Record the video and save it into PC Capture a single picture and save it into PC Retrieve saved pictures or video clips Setup for the picture snapshot or video recording. Description...
To download captured still images from the AVerVision300i to PC, DO NOT connect the USB cable first. Go to Menu, click on the "Advance" option, then click on the "USB Select" option, and choose "IMG Download". Next, connect the USB cable between the AVerVision300i and PC.
The MENU functions of the AVerVision300i enable you to fine-tune your screen display, set the timer, select OSD language and more. Press the MENU button to call up and exit from the main menu or sub-menu display. Use the ▲or▼ buttons to select the items in the menu list.
Page 31
Press ► to make the selection. Use ▲or▼ buttons to select between Auto and Manual. AVerVision300i enables you to automatically or manually adjust the camera to determine how much light is required. If you choose to manually adjust the exposure, press ►or◄...
Page 32
PC Cam and Image Download. In PC Cam mode, you can connect a USB cable to your computer and access the software application from the Driver In Image Download mode, you can download the saved images from AVerVision300i’s built-in memory to your computer.
4. If you are presenting from a notebook or computer through the display output device, please check and switch the document camera source to PC Mode. I have set up the AVerVision300i and checked all the connections as specified in the manual, but I cannot get a picture on the preferred presentation screen.
Page 34
PC or Notebook as well as on the presentation screen. How do I download images from AVerVision300i to PC ? Is it normal that AVerVision300i will reset to camera mode after I download images and disconnect the USB cable? 1.
For a period of time beginning on the date of purchase of the applicable product and extending as set forth in Section 6 of this Limited Warranty (the “Warranty Period”), AVerMedia Technologies, Inc. (“AVerMedia”) warrants that the applicable product (“Product”) substantially conforms to AVerMedia’s documentation for the product and that its manufacture and components are free of defects in material and workmanship under normal use.
USAGE OR PRACTICE OR THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTY RIGHTS. Limitation of Liability IN NO EVENT SHALL AVERMEDIA BE LIABLE FOR INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE, OR CONSEQUENTIAL DAMAGES OF ANY NATURE INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, DATA, REVENUE, PRODUCTION, OR USE, BUSINESS INTERRUPTION, OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ARISING OUT OF OR IN CONNECTION WITH THIS LIMITED WARRANTY, OR THE USE OR PERFORMANCE OF...
Need help?
Do you have a question about the AVerVision300i and is the answer not in the manual?
Questions and answers