Using the hotplate
•
Commercial simmering aids should
not be used as they create excessive
temperatures that can damage the
surface and may cause a hazard.
•
Do not place aluminium foil or plas-
tic utensils on the hotplates, as they
may melt and damage the surface.
•
Do not use the hotplate surface for
storage.
•
When cooking with fat or oil, never
leave unattended.
•
Turn pan handles to a safe position,
so they are out of reach of children,
not overhanging the appliance, and
cannot be caught accidentally.
•
Position pans over the centre of the
hotplate elements.
•
Aluminium foil must not be placed
on the hob as it will reflect any heat
back into the element, which can
damage it.
•
Leaving a hotplate on for a length of
time, without it being covered by a
pan, causes overheating of sur-
rounding areas which could damage
the element.
•
Be careful when cooking foods in
salted water, or foods containing
large amounts of sugar, syrup or
jam - if they are spilt onto hot areas
of the hob they may damage it.
USING THE HOB
To save energy
•
•
•
•
•
•
•
•
6
Always position pans centrally over
the heating area.
Put lids on saucepans and only heat
the amount of liquid you need.
When liquids boil, reduce the control
setting to maintain a simmer.
Consider the use of a pressure cook-
er for the cooking of a complete
meal.
Vegetables will cook quicker if
chopped in smaller pieces.
Larger heating elements are ideal for
faster cooking methods, such as boil-
ing or frying, and for larger pans.
Smaller heating elements are ideal
for simmering and stewing, and for
smaller pans.
Do not use a pan which is too small
or too large for the heating area -
refer to notes on next page.
We recommend you turn off the hot
plate 5 to 10 minutes before the
dish is ready. This allows the heat
accumulated in the hot plate to be
used economically. The hot plate
remains hot for a while after use.