Belling FS50SO WH Users Manual & Installation Handbook page 10

In the event of a cooking pan fire:
1. Turn off the cooker at the wall switch.
2. Cover the pan with a fire blanket or
damp cloth. This will smother the
flames and extinguish the fire.
3. Leave the pan to cool for at least an
hour before attempting to move it.
Injuries are often caused by picking
up a hot pan and rushing outside
with it.
NEVER USE A FIRE EXTINGUISHER
TO PUT OUT A PAN FIRE as the force
of the extinguisher could tip the pan
over.
Never use water to extinguish oil or fat
pan fires.
Warning !
If any of the hot plates become cracked,
disconnect the appliance from the mains
supply and do not use until repaired by a
competent person
Using the hotplate elements
Each hot plate is regulated using a selec-
tor knob.
The control allows for the efficient trans-
fer of heat to the cooking pan.
On the knob, which can be turned in
both directions, there are numbers 0 to
6.
These numbers correspond to the power
setting of the hot plate where 6 is the
highest setting and G is off.
USING THE HOB
8