Lighting Instructions And Fuelling Intervals - Morso 3610 Instructions And Operating Instructions

2.1 Lighting and fuelling intervals
A lot of air is needed when lighting the stove. If you are starting with a totally cold stove, it
may be helpful to leave the door ajar during the first few minutes and open the air supply all
the way.
Wood fuel burns well when placed onto an ash bed on the grate of the stove. To achieve this
you should burn roughly 1- kg of dry kindling the first time you light the stove. You should
build and maintain the ash bed to a thickness of approximately 1 cm.
1. A layer of embers will form rapidly if the stove is lit with
 - 4 fire lighters or 7 - 10 rolled up sheets of newspa-
per, underneath roughly 1- kg of dry kindling.
. Open the air supply fully. Controled with the handle un-
der the ash lip.
3. After the paper/fire lighters have caught fire, leave the fire
door ajar about  cm, so hat the chimney draws well.
4. After 5-10 minutes the chimney draft should be establis-
hed, at this point close the fire door. If all the necessary
conditions are met, a nice layer of embers will start to ac-
cumulate after another 15 - 0 minutes.
9