Morso 3610 Instructions And Operating Instructions page 10

Table of Contents

Advertisement

5. Normal reloading should be done while there are still
coals left. Spread the coals over the bottom but con-
centrated mostly at the front of the stove.
6. Place a piece of wood across the coals in one layer, with
spacing of roughtly 1 cm between the logs.
7. When the air supply is opened all the way and the door
is closed, the new fuel will ignite in a few minutes.
8. Once the new fuel has taken, adjust the air amount to
the desired setting; optimal combustion will continue un-
til glowing coals are produced. Under normal chimney
draft conditions, expect to refuel your stove every 90 -
100 minutes.
9. A new charge of wood can be added by repeating steps
5 & 6.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

3640

Table of Contents